What Sensors Are These?

[YouGotSpooled]

Hey guys. Just going through my wiring harness and tidying a few things up. Which sensors are these? They both are 3 wire sensors and from my knowledge the one on the right is the MAP sensor correct? If so I am missing the wiring/connector for it. How would I go about wiring this back up in my harness? Which ECU pinouts should this sensor be connected to? Any help would be appreciated and I hate wiring but would like to get my car up and running soon! Thanks!

 

[seoul4korea]

The one on the right is your map and then left is the sensor for your boost gauge I think. Is this a fresh swap? As in is everything in the car already? You can search for the ecu pin out and then trace those wires back.

 

[YouGotSpooled]

The wiring harness was being cleaned up and the wires/connector have been removed. So I am unsure what wires/pins to tap into.

 

[Backlash2032]

The one on the left will say what it is. The one on the right is for your boost gauge.

Sent from my HTC6435LVW using Tapatalk 2

 

[YouGotSpooled]

They both say "Turbo Pressure Sensor" but I was under the impression the one on the right was the MAP sensor.

 

[Backlash2032]

I just noticed this was the jz section. The sensor on the right looks like the boost gauge sensor for a 7M. And I don't know why Toyota would use anything else on a JZ

Sent from my HTC6435LVW using Tapatalk 2

 

[YouGotSpooled]

Anyone know which pins the map sensor is hooked up to? Its on a JZA70.

 

[seoul4korea]

The one on the left will say what it is. The one on the right is for your boost gauge.

Sent from my HTC6435LVW using Tapatalk 2

^^^ He's right, after looking on my computer he is correct.