What ring gear to run with my kazz diff

[NashMan]

well i bought my self a kazz diff woot woot 2 way thou since it was in stock i may just try it in 2 way frist befor i change it to 1.5 thou



but now i got to choose what ring gear to run

what i will be useing my car for

drag
auto x
drifting

3.73 witch i run now
3.91
4.30


or if some one makes a 4.10 ring gear witch does not exzist


ps car going to be about 500 to 550 on pump daliy beat will be 400

 

[foreverpsycotic]

430 looks to be too short for you, go with the 391s

 

[BlackMKIII]

4.30 is best for drag IMO.

 

[Poodles]

what engine?

 

[NashMan]

well after i do the math i will have to run a bigger sized tire to go over the line because lack of rpm



but is it worth me spending money on a new tire ?

4.30 is best for drag IMO.

 

[Poodles]

lower redline = lower (numerically) gearing

I'd stick with the 3.73 personally...

 

[TurboStreetCar]

lower Numeric gear = more load = more boost faster = more fun.

 

[NashMan]

that is not fully true but in a way it is any way i will explain why

see with 4.30 off the line you will get about as much load as a 3.73 as soon as you let off the gas as in half thottle you will loose all the load you gained aka highway pull will have dick for load cause the car is moven to fast to gain the load as if you were given full out off the line

lower Numeric gear = more load = more boost faster = more fun.

 

[Poodles]

all around car = 3.73

pure 1/8 mile drag car = 4.30

 

[slidebabyslide]

got pics of ye diff? m want to see it

 

[Mr.PFloyd]

3.91

 

[Zazzn]

3.73 with that much power you don't need short gearing.

 

[NashMan]

all snap some pic's off it even taken apart as well i wana see how many clutch plates they use

it should be at shop soon i hope

so far i am leaning towords the 3.91

got pics of ye diff? m want to see it

 

[pimptrizkit]

i went 3.91 , but wish i would tr a set of 4.30's


im puttin a set of 4.30's in my mkii with a 7mgte, i know it'll be to short for that light car but im thinking 4th gear drifts.

 

[NashMan]

i ran a 4.30 befor at around 400 hp it was fun but ummm i might see 500 plus given my tires to much of work out


i have the ring gear just in case thou for a test run