ricoboost;1981324 said:i will go with my oil pan too, its was made by kaizenmotorsports and come with a special oil pickup tube
I think i've got the same pan. I just don't have the pickup tube. I am gonna fab my own.
What is the most rare mk3 supra part do you own
- Thread starter NashMan
- Start date
I think i've got the same pan. I just don't have the pickup tube. I am gonna fab my own.
well i had some time to kill so ill play too
first is my combo of black/tan interior and the condition of it. i swapped every single piece even the headliner from my old 89t black/tan that was an amazingly clean car and my dumb young ass had to total it. but at least part of it lives on!
second is the custom seat covers that also came from my old supra. sadly they deteriorated so much that i had to throw them away but the head rests still kickin!
finally not supra specific but came off a parts car i got and im sure are pretty rare are this pair of OZ wheels. they're 16x8 made in italy. going to use them for drag radials :naughty:
first is my combo of black/tan interior and the condition of it. i swapped every single piece even the headliner from my old 89t black/tan that was an amazingly clean car and my dumb young ass had to total it. but at least part of it lives on!
second is the custom seat covers that also came from my old supra. sadly they deteriorated so much that i had to throw them away but the head rests still kickin!
finally not supra specific but came off a parts car i got and im sure are pretty rare are this pair of OZ wheels. they're 16x8 made in italy. going to use them for drag radials :naughty:
i want to play, lol
ok off the top of my head;
a real TOYOTA rear sunshade
the rear carpet that hugs the spare tire
Ga70 9K rpm tach
sard 1jz tuned ecu
Trust cast aluminum IC pipe, just before TB
Grey rear hump floor mat with SUPRA print
Full recaro interior
HKS VPC
Fully swapped grey leather int into a white supra
Brand new factory Grey floormats with SUPRA print
R154 out of a 93 2.5 twinturbo R (its rumored to be the strongest, and have the upgraded thrust bearings,a s well as updated syncro's) all i know is it had 28K mileson it when i got it, and it weighs 30lbs heavier than anyother R154 ive ever handled.
ATI 7m clear cover
Euro turns
Euro yellow fogs
bubble side markers
4.10 torsen LSD
Old SKool Cusco super light strut bar (believed to be titanium as a marketing ploy)
Blitz Tems controller
(2) mint 7mgte coil pack covers
stock targa plugs
factory tool bag
one off Sound performance 7m tubular manifold
HKS 60mm Racegate
Toyota Theft Deterrent System Enhancement (TDSE) just missing the keyfob
a few 88 gunmetal climate control units ( 1 year only)
HKS 264 exhaust cam for the 1jz (not a modded 2j cam)
both a 1jz and 7m factory under engine splash sheild
all i can think of right now. still trying to get a jza70 brake duct front lip with ducts, and a 3.0 front grill badge, as well a 2.5 twinturbo R rear badge. and i have to agree with the cupholders not being rare, both our supras have them, and i have probably 6 extra sets.
ok off the top of my head;
a real TOYOTA rear sunshade
the rear carpet that hugs the spare tire
Ga70 9K rpm tach
sard 1jz tuned ecu
Trust cast aluminum IC pipe, just before TB
Grey rear hump floor mat with SUPRA print
Full recaro interior
HKS VPC
Fully swapped grey leather int into a white supra
Brand new factory Grey floormats with SUPRA print
R154 out of a 93 2.5 twinturbo R (its rumored to be the strongest, and have the upgraded thrust bearings,a s well as updated syncro's) all i know is it had 28K mileson it when i got it, and it weighs 30lbs heavier than anyother R154 ive ever handled.
ATI 7m clear cover
Euro turns
Euro yellow fogs
bubble side markers
4.10 torsen LSD
Old SKool Cusco super light strut bar (believed to be titanium as a marketing ploy)
Blitz Tems controller
(2) mint 7mgte coil pack covers
stock targa plugs
factory tool bag
one off Sound performance 7m tubular manifold
HKS 60mm Racegate
Toyota Theft Deterrent System Enhancement (TDSE) just missing the keyfob
a few 88 gunmetal climate control units ( 1 year only)
HKS 264 exhaust cam for the 1jz (not a modded 2j cam)
both a 1jz and 7m factory under engine splash sheild
all i can think of right now. still trying to get a jza70 brake duct front lip with ducts, and a 3.0 front grill badge, as well a 2.5 twinturbo R rear badge. and i have to agree with the cupholders not being rare, both our supras have them, and i have probably 6 extra sets.
damn I'm jelly^
I've got a 3.0 turbo badge, and no one can have it
didn't post any pics, so here they are.
custom exhaust made by CJ Rayle (yakuzastinger) @ Niced Up Motorsports (I didn't let him finish adjusting it, still needs to be hacked up some more for T4 install.)
rsr/tanabe/bilstein suspension (don't know anyone running this combo)
discontinued 17x9 and 10" 5zigens couple very minor scuffs here and there. probably going to have them powdercoated
new wheel w/ trd horn, 3.0 turbo badge (w/ sustained high-speed wear) and jza70 fogs
all my "rare" stuff is just custom, expensive, or discontinued... not entirely rare
I've got a 3.0 turbo badge, and no one can have it
didn't post any pics, so here they are.
custom exhaust made by CJ Rayle (yakuzastinger) @ Niced Up Motorsports (I didn't let him finish adjusting it, still needs to be hacked up some more for T4 install.) rsr/tanabe/bilstein suspension (don't know anyone running this combo)
discontinued 17x9 and 10" 5zigens couple very minor scuffs here and there. probably going to have them powdercoated
new wheel w/ trd horn, 3.0 turbo badge (w/ sustained high-speed wear) and jza70 fogs
all my "rare" stuff is just custom, expensive, or discontinued... not entirely rare
Last edited:
I've got 17x9 and 17x10 5zigen FN01R-C's on my Supra. Also have 17x8 5Zigens on my Cressida too, and a spare pair of 17x8s and pair of 17x9s. I love those wheels haha.
I've got the RSR springs with Tokico Illumina IIs (TEMS adjustable). Going to be replacing those with JDM Toyota Bilsteins when I take em off.
I bought the last set of new JDM bubble side markers in the US according to the guy I talked to at the dealership.
I've got the RSR springs with Tokico Illumina IIs (TEMS adjustable). Going to be replacing those with JDM Toyota Bilsteins when I take em off.
I bought the last set of new JDM bubble side markers in the US according to the guy I talked to at the dealership.
do people rebuild the jdm bilsteins or what? as for the wheels, I'd wanted a set for a long time. never had the spare $ when they were in production, just happened across a set on here for sale a few months back.
(past) I had one of two sets of Kei Office coilovers in the US made for the A70, Hiro taillight covers, JZA70 rainguards, 89+ GA70 9k rpm tach, and clear JZA70 bubble markers.
(present) I guess the other arguably somewhat rare items would be: full TTR interior that is cleaner than anyone elses (haha), TTR Momo wheel, JZA70 optional Momo 3-spoke wheel, Euro 89+ LHD folding mirrors, pre89 euro orange/clear signals, JZA70 bubble markers, JZA70 Bride mats, WELD engine cover, Vertex shiftknob for toyota thread pitch (black), TTR full moldings, TRD camgears, TRD (toyota technocraft) tuned ECU, ProjectSupra CF cam gear and fuse box covers, 1/10 custom low profile hatch spoiler made by Javis M, Comrade C's short throw shifter.
(present) I guess the other arguably somewhat rare items would be: full TTR interior that is cleaner than anyone elses (haha
), TTR Momo wheel, JZA70 optional Momo 3-spoke wheel, Euro 89+ LHD folding mirrors, pre89 euro orange/clear signals, JZA70 bubble markers, JZA70 Bride mats, WELD engine cover, Vertex shiftknob for toyota thread pitch (black), TTR full moldings, TRD camgears, TRD (toyota technocraft) tuned ECU, ProjectSupra CF cam gear and fuse box covers, 1/10 custom low profile hatch spoiler made by Javis M, Comrade C's short throw shifter.
I bought some parts on the Facebook pages. I have been told they were rare..
TRD Group A Cams.
These are 10.88 lift and 256 duration.
I have been told that Toyota made 3 or 4 cam profiles, that were 256, 264?, 272, 288.
The day I bought them, there were to set sold (256 and 272), that are told to come from a Trust shop car (the car used to develop the bolt on td06) and a group a race car, so they have MK3 history in them as well. The set I bought came from the Trust shop car.
Turbonetics T4 Manifold
A T4 cast manifold with external wastegate.
Came from a Kaizen Motorsport shop car. Jose himself made the spacer.
It is advertised as Turbonetics, but there is no engraving or label of this nowaday called HKS style manifold.
Some thought it was a Tredstone (discontinued), and here is what previous owner said:
and the previous previous owner said:
TRD Group A Cams.
These are 10.88 lift and 256 duration.
I have been told that Toyota made 3 or 4 cam profiles, that were 256, 264?, 272, 288.
The day I bought them, there were to set sold (256 and 272), that are told to come from a Trust shop car (the car used to develop the bolt on td06) and a group a race car, so they have MK3 history in them as well. The set I bought came from the Trust shop car.
Turbonetics T4 Manifold
A T4 cast manifold with external wastegate.
Came from a Kaizen Motorsport shop car. Jose himself made the spacer.
It is advertised as Turbonetics, but there is no engraving or label of this nowaday called HKS style manifold.
Some thought it was a Tredstone (discontinued), and here is what previous owner said:
Zumtizzle said:
and the previous previous owner said:
soapra said:
@Rollus
Could you messure the lift of your TRD cams for me please? I have a set of those TRD cams too, but my lift is only 9,2mm but my duration is 264°. So could it be possible that the lift depends on the duration?
Could you messure the lift of your TRD cams for me please? I have a set of those TRD cams too, but my lift is only 9,2mm but my duration is 264°. So could it be possible that the lift depends on the duration?
Silent Deatz;1997574 said:
I will, probably next week ;-)
Mine are 256 and should be 10.88. That's also the results of my search results. I will degree and cardcam them Btw.
@JDMMA70 Nice ;-) any pic?
HKS TEMS controller
HKS boost gauge
HKS EGT gauge
Recaro speed seats made for JZA70
Momo TRD steering wheel
GA70 9k tach
HKS boost gauge
HKS EGT gauge
Recaro speed seats made for JZA70
Momo TRD steering wheel
GA70 9k tach
To add value and viewing pleasure to this thread, could we see pics of the parts - installed?
Example:
Carbon fiber Stout hood (replica)
Good view of the "ghost" paint job on the hood
Ganador mirrors
Kaminari wing
Old School HKS boost gauge
MK3 Trd strut tower bar
Ron R intake manifold. Used to be full polished. Now has a machined powder coat finish.
Autopower style roll cage
HRE 545 wheels
Authentic Gracer front bumper.
Doc Race Dual Wastegate Divided Exhaust Manifold. 1 of 1
Example:
Carbon fiber Stout hood (replica)
Good view of the "ghost" paint job on the hood
Ganador mirrors
Kaminari wing
Old School HKS boost gauge
MK3 Trd strut tower bar
Ron R intake manifold. Used to be full polished. Now has a machined powder coat finish.
Autopower style roll cage
HRE 545 wheels
Authentic Gracer front bumper.
Doc Race Dual Wastegate Divided Exhaust Manifold. 1 of 1
Last edited: