what can the 7m fit in?
- Thread starter tlo86
- Start date
Any engine can be put into any vehicle. It just depends on how well you can fabricate or how deep are your pockets. In this case I think it has been done before and talked about here.
go over to 7mpowered.com and check out one guys build thread there.
I dont know if im supposed to say anything, or if its top secret, but i know someone putting a wicked 7m in there "22re" truck......:icon_razz
I dont know if im supposed to say anything, or if its top secret, but i know someone putting a wicked 7m in there "22re" truck......:icon_razz
heh, will, it's no secret. tlo86- i'm building a high compression turbo 7m for my '94 toyota pickup. i plan on making 300rwhp out of it. 
still in the gathering parts stage. considering i have a 22re in there now, that means my transmission is a w56, which will bolt right to a w58 (7m) bellhousing, and obviously to the 7m.
you use the clutch and flywheel from a 7m. use 5m motormounts with about 3mm of shims on the back, and it'll bolt right up to the chassis. then it's wiring, fuel, relocate the battery for the intake, etc...
once my car is complete, i'll be going full bore on this project.
-shaeff
still in the gathering parts stage. considering i have a 22re in there now, that means my transmission is a w56, which will bolt right to a w58 (7m) bellhousing, and obviously to the 7m.
you use the clutch and flywheel from a 7m. use 5m motormounts with about 3mm of shims on the back, and it'll bolt right up to the chassis. then it's wiring, fuel, relocate the battery for the intake, etc...
once my car is complete, i'll be going full bore on this project.
-shaeff
shaeff said:heh, will, it's no secret. tlo86- i'm building a high compression turbo 7m for my '94 toyota pickup. i plan on making 300rwhp out of it.
still in the gathering parts stage. considering i have a 22re in there now, that means my transmission is a w56, which will bolt right to a w58 (7m) bellhousing, and obviously to the 7m.
you use the clutch and flywheel from a 7m. use 5m motormounts with about 3mm of shims on the back, and it'll bolt right up to the chassis. then it's wiring, fuel, relocate the battery for the intake, etc...
once my car is complete, i'll be going full bore on this project.
-shaeff
do you have a build up thread of it? i want to see it
ive heard of it being put into a skyline but never seen anything about it..
anyone got links for this?
anyone got links for this?
Build up the 22Rshaeff said:heh, will, it's no secret. tlo86- i'm building a high compression turbo 7m for my '94 toyota pickup. i plan on making 300rwhp out of it.
You talking about the Rigoli R32 GTST, this car turned up to a dyno day I was at with Toymods in Australia about a year ago, I've never seen a car lay 2 black lines down a road yet still move as fast at the same time.supradavenz said:
Was running consitent mid 9's at the time. Even better was how approachable and friendly the owners were at a nice show and tell.:love:
http://autospeed.drive.com.au/cms/article.html?&A=2885
hmmm, been toying with the idea of dropping 7m into a 2 door 2wd cherokee....just to show there are no hard feelings after molesting my mk2 with a sbc
Applications:
1986.5–1992 (1987–1993 in Japan) Toyota Supra MkIII (MA70)
1988–1993 Toyota Soarer
1989–1992 Toyota Cressida Mark II (MX83)
Toyota Chaser
Toyota Crown
For sure anything else depends on your skell level/bank balance
1986.5–1992 (1987–1993 in Japan) Toyota Supra MkIII (MA70)
1988–1993 Toyota Soarer
1989–1992 Toyota Cressida Mark II (MX83)
Toyota Chaser
Toyota Crown
For sure anything else depends on your skell level/bank balance
on the pickups you need to cut and weld the front lower radiator support. i was toying with the idea of putting one in my 94 pickup but its alot of work, also have to move the radiator fowards a few inches and have to mount an electric fan on the front of the radiator because theres not enough room. at least thats what ive seen bieng done.
Not that it's 7m or anything, but the guy that sold me my car had a lowrider looking truck that's running a 1j under the hood. :naughty:
I forget what kinda truck it was, I'd have to give him a call.
I forget what kinda truck it was, I'd have to give him a call.
my dad is putting a 7mgte into his 1985 toyota celica GTS (last yr of rwd i beleive)
its a squeezer but its possible.
its a squeezer but its possible.