What am I missing? Turbo install

[Inygknok]

I e-mailed the guys over at suprasport, but I need a reply by tomorrow at 8am, so I know I can get an aswer here within the next few hours.

I recently purchased the softline kit for the CT-26, which works great, but I was wondering one thing. I was looking at http://www.suprasport.com/Turbo-install-breakdown_p_481.html to figure out what else I could add.


Now, excluding the items that are the equivalent of the softline mod, what else from that kit should I get.

Also, do I need to weld the fitting for the water lines on the turbo? No store sells a flange that bolts on to it to use any kind of fitting.

 

[paradox616]

I assume your converting a 7mge?

trace the flange plate on the ct26, and get one lazer cut OR try and find someone with one. surely it cant be that hard? i have 2x sitting in my garage.

Pm me if your desperate i have a spare water lines (flange & hard line) on my blown ct26 i can send you. but i'm in Australia so postage will be a few $$ and take a while.

most likely need some more details on what your trying to achieve here.

 

[Inygknok]

I assume your converting a 7mge?

trace the flange plate on the ct26, and get one lazer cut OR try and find someone with one. surely it cant be that hard? i have 2x sitting in my garage.

Pm me if your desperate i have a spare water lines (flange & hard line) on my blown ct26 i can send you. but i'm in Australia so postage will be a few $$ and take a while.

most likely need some more details on what your trying to achieve here.

No, it's a GTE. I bought my current CT-26 from another member but the turbo did not include the stock flange from the top side of the coolant lines. I think there's another extra flange to finish the loop for the coolant lines. All I'm trying to achieve is to set up more lines with stainless lines and Earl's fittings. The kit I posted has fittings for the water neck which work with the turbo, so it's logical to presume that they make the fittings work with the stock CT-26 somehow.


EDIT: I had a MUCH better picture sometime this afternoon but I can't find it, but there are 2 pictures I just found.

http://media.photobucket.com/image/7mgte/GT45_2008/022.jpg

http://media.photobucket.com/image/7mgte/TheStitt/small005-1.jpg

Look how they have fittings where the water lines go to the turbo. I swear I had a picture of one shot directly on that spot, but it was clearly welded on. Still asking just in case someone knows of one of our shops that sells one of these adapters.



SECOND EDIT:
This is what I was looking for:

http://cgi.ebay.ie/Turbo-Water-Flan..._CarParts_SM?hash=item1c0bd6d37f#ht_885wt_754

So anyone stateside got something like this?

 

[Zumtizzle]

I'd just go to toyota and pick up both sides bud.

Sorry i didn't send you the plate and the water hardlines. (i needed them for my turbo)

 

[Inygknok]

I'd just go to toyota and pick up both sides bud.

Sorry i didn't send you the plate and the water hardlines. (i needed them for my turbo)

Np at all, I didn't even notice until I started gathering all the fittings. Completely went past my head.