I cant figure out for the life of me how to get the front bumper off my car. i have the entire botoom section loose, but it's near the bumper foam that i cant figure out. Any tips or tricks? where to look? Pictures? TSRM didnt help me too much. Gah, stressful. Thanks guys.
Well, I guess Im just retarded with body parts.
- Thread starter CDNSUPRA
- Start date
There was a cap type bolt that i took off, but i figured that was for the foam. It was located above the fog light, is that the one youre talking about?OfnaRcR4;893783 said:
CDNSUPRA;893794 said:
did you remove the bolts on the upper side of the front main air duct (same orientation as those bolts above the fog lights) if not, there's your problem!
Its a bitch to get off, I just changed mine out from my 87 to an 89. Believe me its no 30min job, just take your time, and double check everything. My biggest problem was fog light housing.
D34DC311;894828 said:
Yeah, I gave up after 1 1/2 hrs lol. My fogs are just held on by two bolts...?
Well, when I get time off, or some free time on the weekend, I'll try again. Thanks guys.
gtsfirefighter
SM Expert on White trash
Mine came right off. The two big bolts in each frame rail and all the little number tens around the fenders and behind the grill.
The brackets will come off with the bumper.
There's the two grilles beside the turn signals. Take those out, there are some screws behind them.
If you look up from the bottom, you should see the two bolts that hold teh fog lights in. Take them out, I believe there are some bolts behind them.
There are I think 3 bolts on the INSIDE of the bumper in front of the horn as well.
Ihate taking the bumper off.
There's the two grilles beside the turn signals. Take those out, there are some screws behind them.
If you look up from the bottom, you should see the two bolts that hold teh fog lights in. Take them out, I believe there are some bolts behind them.
There are I think 3 bolts on the INSIDE of the bumper in front of the horn as well.
Ihate taking the bumper off.
Hw did you guys deal with the small cap type bolt behind the hydraulic fan lines right in the middle of the bumper? thats the last little c*nt i need to take off!
This is why my front bumper is held on by 4 bolts and one support... Easy access. Check your wheel wells.
4 bolts and his is off lol
Finally got that b!tch off. the last one hidden behind the hydraulic fan lines was he biggest pain in the ass EVER! Now i just need advice on how to mount my greddy bumper....