well here goes nothing

[first_mkIII]

today i star my journey takeing the motor apart im hopeing it wont take me too long then again its my first time and im doing it by myself im off to a slow start but ill keep you guys updated!!!

[/IMG]
first parts off

[/IMG]
look inside the intake!!

[/IMG]
ha i wounder what this is :sarcasm:

[/IMG]
my new toy as of sat.

[/IMG]

[/IMG]
well ill keep you guys up to date with pics of progress..till then:evil2:

 

[Kckazdude]

Wow. That is really bad. Just take your time and label everything as you need to. Best of luck with it.

 

[super.secret.supra.club]

Pheeew, looks like you got some work ahead of you. Don't be afraid to use sandwich bags and old sticky labels with a sharpie for the small stuff. Ask me how I almost went insane when I lost my thrust washer...

 

[Clip]

haha, i went through at least 2 boxes of sandwich bags. take the masking tape and label all hoses, wires with numbers that = numbers on part bags

 

[first_mkIII]

yeah im puting everything that i can where it goes what scares me are the vac lines and forgetting where they go.

 

[Kckazdude]

Nothing to it but doing it!

 

[TheRemedy]

whats the plastic peice called bettween the 2 valve covers where the spark plugs go through...mine is all rotted out lol..but i donno what its called so i donno how i can buy a new one

 

[IJ.]

Bit of a hint: less "IMG" tags would be good when posting pics

 

[suprahero]

yeah im puting everything that i can where it goes what scares me are the vac lines and forgetting where they go.

This should help you with that.
http://www.cygnusx1.net/Supra/TechTips/vacuum_hose.aspx

 

[TheRemedy]

the part the yellow arrow is pointing to..sorry..im not great with computers..that was alot of work for me..lol

 

[noah89t]

its not hard to pull and rebuild the motor. get lots o sandwich bags, brake cleaner and buy yourself a tsrm from toyota. call watson 1-800-327-2087

 

[nvgc8]

I believe the part you are looking for is the #3 Cylinder Head Cover.

http://cygnusx1.net/Supra/Library/TSRM/MK3/manual.aspx?Section=EM&P=32

 

[first_mkIII]

well i had to stop for today im running out of light and tolls have to do some shoping tommorow,couldnt get the turbo off the manifold tight spaces i hope i can pull it off with the mani..

 

[noah89t]

if you don't have them, get some good ratcheting wrenches in 10,12,and 14mm.
when you pull the big oil line from the block for the turbo, (it's a 17mm) remember, it uses two copper crush washers. don't forget to replace them

 

[first_mkIII]

do you know if i can pull the manifold with turbo on it?

 

[s383mmber1]

do you know if i can pull the manifold with turbo on it?

Im sure you "could".

The turbos really fairly easy to get off, I got it off with just a 14 mm wrench IIRC (off the manifold) in like an hour.

BEST thing to do it soak the bolts in penetrating oil and let the sit over night.

As for remebering vacume lines and such. I would go out and buy 6-8 feet of all the standard vacume line sze at the auto parts store for like 40 bucks and re do all of them. That what i jsut recently did and it came out fantastic and my supra idles much better.

Definatly, definatly take lots of pictures of the motor and englarge them 11x17. It helps with re-assembly. Bag EVERYTHING, and most of all, take your time and ask many many questions.

 

[first_mkIII]

well i got the top half off looking to get the block out this weekend was trying to get er done by the last week of dec. but dont think thats going to happen:3d_frown:

looks like something that has to do with the egr is missing...

my greedy turbo:naughty:

 

[s383mmber1]

Take your time and dont rush!

About the greddy turbo, is that a bolt on turbo for the 7m manifold?

TD06?

 

[first_mkIII]

thats the one..

 

[slidebabyslide]

were did you get the turbo from ? Remove all the coolent and oil from your bottom end. Cool you have a zx6 .
You won't be out of transportation.