welding o2 sensor 2 off bic ddp
- Thread starter UpbeatFish
- Start date
- Status
adampecush;1325545 said:
Was this not obvious to you as soon as you saw threads in there?
Or Randy could probably give you a size to take to your auto parts store.
Go to Napa auto parts or any auto parts for that matter and ask for a drain plug for a oil pan. If I remember right mine was m17 or maybe m18. Grab yourself a brass or copper washer as well. You can go real ghetto and in a pinch you can use a spark plug and break off the end.
Last edited:
whoa lets keep it constructive guys. plugs for o2 sensor bungs are not a hard item to find. im sure randy will have them....and call around to local places someone has one. dont weld it. if you still have no luck ill give you on i have like 5 in my toolbox
whowouldfigga;1325582 said:
this is a goood idea except for the fact that not all drain plugs are the sdame size. and id keep it non ghetto supras tend to fight back when you go ghetto
yeah i hecked and investageted its 18x1.5 and i called EVERYWHERE and i cant find it. i just asked for 02 sesor plug. but the oil drain screw sounds like a good idea. napa is a peice of shh....poop (well the one overe here) all they have is pipes... a bunch of rubber pipes.... but ima go check anyway. thank you everyone.
okay check this out. there is no place that carrys 18mm screws. but i happen to found one that fit which was a spark plug screw cleaner. i fixed it, tighten it and my next problem was that the bic down pipe had a.... flap of some sort that comes off the end of it. i welded that off and installed the ddp. and i have never been happier with anything before. it is LOUDDD!!!!! at full boost. still boosting 6lb but it feels more toqurier and faster. it has those random after fires and runs perfect. thank you
That "Flap" that you removed is what makes the design actually work and produce more power you tard :nono:
- Status