I had IS300 coils running good in wasted spark mode on the AEM V2 and a DH61 igniter. I've just converted to Granatelli Xtreme COP coils powered by an EFI source coil igniter module wired to fire full sequential. Cranking the car over it sounds like it's only firing on one cylinder. All coils are getting an ignition signal (verified with an LED), and I've pulled the plugs and watched for spark and there is spark but it's very weak and orange color (and isn't even strong enough to trigger my timing light).
I have yet to find good numbers for the dwell settings on these coils, but the AEM is logging ~8ms dwell while cranking which seems like it would be enough, but I am going to try and increase this just to test. I wish I had a scope (but don't), so I'm troubleshooting this without it for now. Here is how I have everything wired up. Any help/suggestions would be appreciated!
I have yet to find good numbers for the dwell settings on these coils, but the AEM is logging ~8ms dwell while cranking which seems like it would be enough, but I am going to try and increase this just to test. I wish I had a scope (but don't), so I'm troubleshooting this without it for now. Here is how I have everything wired up. Any help/suggestions would be appreciated!