does anyone know how to propperly remove these??? mine are severely cracked, and i'm going to replace them soon
vents behind the windows
- Thread starter Insidious Surmiser
- Start date
yea. you have to remove the trim from the inside.remove the seat belt thing then pop some of those push in button things and remove them.
If you're speaking about the black panels on the exterior right next to the doors.. then, you have to remove the trim from the inside of the car and there will be some screws you have to remove.
aha... thank you very much 
one on my car is already bent and cracked where the previous owner tried to remove it :-/
one on my car is already bent and cracked where the previous owner tried to remove it :-/
the fun part is when the nut rusts onto the bolt and the bolt will spin in it's plastic holder.. so then you have to rip off the vents and cut off the bolts..
you'll need deep sockets. i beleive its an 8.
you'll need deep sockets. i beleive its an 8.
thanks again, for even more detailed info
and in that case... just means more fun w/ the cut-off tool
and in that case... just means more fun w/ the cut-off tool
I'm going with a 10mm on the bolts and yes its fun. Its a hell of a lot easier when you take out your entire interior to replace it with shadow grey.:bigthumb:
But really its not bad just be careful not to break all of the clips when taking the old trim off.
But really its not bad just be careful not to break all of the clips when taking the old trim off.
Yep, remove trim, there will be 2 8mm nuts holding it. the studs are in the plastic piece. then its one lttle clip in the middle u can just pop it out or push it out easy job. but i hate having to remove the trim on the inside
easy job. but i hate having to remove the trim on the inside