The previous owner had this port blocked off. What should it connect to, and should it be blocked off. EGR has been removed, although I thought that wouldn't affect the fuel pressure vacuum port.
Vacuum port by fuel pressure VSV
- Thread starter oldmansupra
- Start date
Goes up from there, between the intake runners, connects to a hardline next to the 3000 pipe, and ends up at your bypass valve that connects the intake to the 3000 pipe.
Right, so it runs where the red line is here:
Since I have a aftermarket blow off valve and am venting it to the the atmosphere I can now plug off the port previously described correct? Also since my blow off valve is now located on the intercooler piping that attaches directly to the 3000 pipe I can plug off the port on the accordian hose, and the port on the front of the 3000 pipe.
Since I have a aftermarket blow off valve and am venting it to the the atmosphere I can now plug off the port previously described correct? Also since my blow off valve is now located on the intercooler piping that attaches directly to the 3000 pipe I can plug off the port on the accordian hose, and the port on the front of the 3000 pipe.
Nice lol, last september just used some silicone vacuum tube and stuck a bolt in tight. Any better ways to plug that vacuum line?