Vacuum EGR help

[djblastsupratuner]

Okay so my 7mgte had an egr system removed and i bought it half way done. So now that i removed the whole system some but i noticed a lot of the silicone hoses plugged in the wrong places and it confused me completely. Im asking anybody if they can post their engine pics on how the hoses are setup. Also i need the Vacuum pipe part in YELLOW. and the i dont know where the RED leads off to. someone please i appreciate if you can help me.
Thanks

 

[black91turbo]

the red arrow is pointing to the vacuum nipple that goes alll the way up to the hardline that attaches to the 3000 pipe which connects to your bypass valve. (in the picture it is the thicker line that doesn't have any hoses going to it....right by the throttle body) If you look at where your coilpack is grounded.....there should be a J looking vacuum tube that connects the the vacuum from that nipple to the hardline by the 3000 pipe. AS far as the hardline that you need.....just post in the WTB section.....it is a subforum in the Parts For Sale section. I will send a pic tonight if no one else replies. Good Luck!

 

[djblastsupratuner]

the red arrow is pointing to fuel pressure VSV return vacuum hose. There should be 3 nipples on that hardline 2 for the fuel pressure VSV (feed and return) and 1 for the EGR VSV feed only.

So can i block that off cause i dont have an egr.

 

[black91turbo]

So can i block that off cause i dont have an egr.

No don't block that off...reread my post because after looking at it I realized that i was wrong.

 

[92nsx]

I have that vac. pipe you need. send me a PM if would like it.