Vac line issues

[Kenny[NK]]

I checked the tsrm and tried to put the hoses int he correct order but it hasn't worked. It's messing with my acis too I believe. That and there are hoses that go nowhere.
I need a complete diagram(detailed) that shows where all the vac lines go.

Thanks.

 

[CRE]

http://www.cygnusx1.net/Supra/Library/EPC/291410/catalog.aspx?F=1708&P=2

and for the egr
http://www.cygnusx1.net/Supra/Library/EPC/291410/catalog.aspx?F=1708&P=2

 

[supramacist]

OMG another supra in Kentucky.

You're going to have to represent better than that post.

Your shite isn't 4 wheel drive is it?

 

[Kenny[NK]]

Thanks for the help.

 

[supramacist]

Where are you in KY? I'm over here by Nashville. I was just teasing you with 4 wheel drive bit.

Welcome to the forum.

 

[Kenny[NK]]

It has a 6" lift on it. Haha.
I live in Henry County, Kentucky. It takes about 45 minutes to get to I-65/I-265 interchange.


I think I got everything about right. I don't have the valve on top on the tank (refer here http://www.cygnusx1.net/Supra/Library/EPC/291410/catalog.aspx?F=1708&P=2) or the nipples on the tank. You guys think that grabbing one from the yard is alright?

 

[supramacist]

I"m not kidding dude I have seen people in the uk take these things and turn them into monster supras. But ya I was making a red neck joke..

The underside of your stock hood should have a diagram on it.

http://www.cygnusx1.net/Supra/Library/EPC/291410/catalog.aspx?Figure=1708&Page=2

This should aid you. Alot.

EDIT: It's huge.

 

[Kenny[NK]]

It's all desiel dually around here and john deer hats.
Haha.

The underside of my hood does not have anything on it. Thanks for the link bu tI was asking if it was alright to go and get the valve and tank from a junk yard. There are a few mk3s in one a few miles away.

 

[supramacist]

Your 1st post said you needed what I gave you.

But that's cool save and you'll always have it.

I myself tend to stay away from salvage yard parts of any type.

 

[Kenny[NK]]

My fault. CRE had posted that but that is what I used to route my vac lines.
Thanks for the help, though. I'll check out some parts places.

 

[supramacist]

www.horsepowerfreaks.com

EXT. 103. Speak to Dave. He'll take care of all your needs and won't break it off in you.

I'm thinking you may be dealing with a toyota only part. Which means dealership.

But you should look everywhere.

 

[Kenny[NK]]

Will do. Thanks.

 

[AJ'S 88NA]

You could post in the WTB section for one.

 

[Kenny[NK]]

Already got one. Thanks for the advice, though.