ummm what?? did i just waste 100buxs?

[doom26464]

umm k well got my oil pressure sendor from toyota today wich cost a 100buxs BTW and it looks just like the oil pressure sendor I have now?? WTF. I though that there was a clip that sticks out of it so that the plug can slide on it. IM am unbelivable confused and lost. Can some one plz plz show me the stock oil pressure sendor and whatever the the fuck it connects to???

 

[IJ.]

Little round brass connector in the middle of it?

 

[doom26464]

Little round brass connector in the middle of it?

yah there is one.... hmmm damnit i will have to go out and spend 2 hours shovling my car out of the snow and look at the one on the engine right now to check if it has one as well....

 

[flubyux2]

if both of your sensors have what LOOKS like the head of a Brass nail sticking out the top of them, they are correct.

there is supposed to be a black plastic rectangular electrical connector at the end of your yellow/black wire. maybe yours broke off back in the day and the previous owner put a plain crimp connector on it?

 

[doom26464]

if both of your sensors have what LOOKS like the head of a Brass nail sticking out the top of them, they are correct.

there is supposed to be a black plastic rectangular electrical connector at the end of your yellow/black wire. maybe yours broke off back in the day and the previous owner put a plain crimp connector on it?

liek this??

2 of them go to thermo stat housing other one i beliveis oil pressure sendor but i dunno how it goes on it?

 

[flubyux2]

those look like the correct connectors.

normally, the oil pressure sensor lead has a silicone boot on the wire. it cant come off the wire due to the hole being so small tht the plastic clip wont go thru it.

the oil press sensor is usually black. it slides on Sideways. look at the tip of the connector. there is a groove thru which the stem of the "brass nail head" goes into, like a 5th wheel hitch on a semi truck. this groove is opposite side of the connector as viewed in this picture. you should just be able to slide it on sideways and feel it click into place.