Two months from 500hp
- Thread starter Bomberillo
- Start date
Just broke up with girl friend, cheap rent and a 4500 monthly salary. Yeah two months. Ive been prolonging it as is. Two months promise. And Ill give you guys pics and videos.IJ.;1276873 said:"Two Months" yeah ok we'll see
IJ.;1276878 said:The engine might have other ideas
Doing it right, the 7m is a good engine. You just have to take other peoples mistakes and learn from them. I think I can get their, and when I do Ill let you guyz know.
ok as I said we'll see.......
You come back slap 500rwhp dyno sheet and vid here in 2 months time and I'll be the first to congratulate you.
You come back slap 500rwhp dyno sheet and vid here in 2 months time and I'll be the first to congratulate you.
Ill be second...2 years and a lot of time and money and I haven't passed that hurdle.
What IJ. Is getting at is there really is no such thing a "2 month 500 hp build" there's comlications along the way. Machine shop error, part back ordered, valve shims wrong, fabricating taking to long, etc......a lot can and will happen.
That said subscribed ill be second in line with the congrats beacsue if you pull off that power goal in this amount of time you desevre all the congradualtions in the world.....(and money isn't everything....I have spent and obsecene amount on my car)
What IJ. Is getting at is there really is no such thing a "2 month 500 hp build" there's comlications along the way. Machine shop error, part back ordered, valve shims wrong, fabricating taking to long, etc......a lot can and will happen.
That said subscribed ill be second in line with the congrats beacsue if you pull off that power goal in this amount of time you desevre all the congradualtions in the world.....(and money isn't everything....I have spent and obsecene amount on my car)
A buddy of mine has dumped 13k in his supra & still only low 4OOhp
Heres his list of mods though :
SP61, greddy 3mm hg, arp bolts in head, rods, mains, spearco ic, cooleeze pipes, SSQV, fluidyne radiator, 550's/lexus, K&N FIPK, profec e-o1, e-manage blue, BIC divorced dp, blitz nur spec, greddy egt, oil pressure, water temp guages, AEM uego wideband, fuel pressure reg., driftmotion stainless braided fuel and cold start injector line, walboro, greddy front & cusco rear strut tower bars, st sway bars, jic lower brace, tokico struts & springs, HKS upper pillow ball mounts, du luck rear cross bar, hellios HID's, mkiv wheels, MOMO stearing wheel, blitz tt, KVR cross drilled rotors/pads, stainless braided brake lines, MDC's stainles braided turbo oil lines, fidanza flywheel, RPS stage 2 clutch. New Toyota internals except for all the ARP's
Heres his list of mods though :
SP61, greddy 3mm hg, arp bolts in head, rods, mains, spearco ic, cooleeze pipes, SSQV, fluidyne radiator, 550's/lexus, K&N FIPK, profec e-o1, e-manage blue, BIC divorced dp, blitz nur spec, greddy egt, oil pressure, water temp guages, AEM uego wideband, fuel pressure reg., driftmotion stainless braided fuel and cold start injector line, walboro, greddy front & cusco rear strut tower bars, st sway bars, jic lower brace, tokico struts & springs, HKS upper pillow ball mounts, du luck rear cross bar, hellios HID's, mkiv wheels, MOMO stearing wheel, blitz tt, KVR cross drilled rotors/pads, stainless braided brake lines, MDC's stainles braided turbo oil lines, fidanza flywheel, RPS stage 2 clutch. New Toyota internals except for all the ARP's
Well said guyz. I guess I was optimistic. We will see when I am done with her maybe Ill be putting down low 400's but at least she will be running thats all that I really care about. Quake is pulling 600hp with some mods and a port and polish on his head. Standalone yeah but hes pulling good numbers. I can only hope to break 500hp.
Only about a third of these upgrades are horsepower increasing upgrades. I have all of these and 1.Dr Chill;1276911 said:
It is doable in 2 months if you have the cash. Start now or it will not happen. Everything in my build has been a fight.
IJ i respect what you say because you seem to have a reputation on this forum. Didnt mean to start anything just wanted to show some pictures of my car and share the plans I have for her.IJ.;1276881 said:
Last edited:
funky_monkey58;1276997 said:
Thanks. Just so everyone knows I have been collecting the parts for the build for quite some time now. So its not really a 2 month build more of a 1 year build. But I give myself 2 months to complete the job.
Ok what the car has from when I bought it. 60-1 trim ct26, hks front mount, greddy boost controller, walbro, 550's, lexus afm, Hks twin power igniter, Fcd, Aluminum radiator. What I have gathered all arp hardware, Wiseco's 9-1, Eagle rods, Aem Ems, Fidanza Flywheel, fidanza cam gears, Hks stopper 2mm head gasket, port and polished head, 1mm oversized ferrera valves, ferrera valve springs and retainers. What I will buy in near future, Maybe crower cams, Areomotive afpr, oil catch can, Hks ssqv. Thats it if I missed anything to hit 500 please feel free to let me know.funky_monkey58;1277003 said:
Bomberillo;1277004 said:
Did u miss something umm yea wrong turbo for that kind of power ..... try something like a boss bolt on turbo atleast for 500rwhp. The afpr is a must if not a 1st.
It's not a 1 (one)
I wasn't ragging on you it's just that people seem to have the idea that a 7M+xxx$=500rwhp it's not that easy!
Trust me on this I have a huge budget for playing cars and I'd hesitate to say 2 months for a 500rwhp build.
If you can pull it off as I said I'll be the first to slap you on the back!
I wasn't ragging on you it's just that people seem to have the idea that a 7M+xxx$=500rwhp it's not that easy!
Trust me on this I have a huge budget for playing cars and I'd hesitate to say 2 months for a 500rwhp build.
If you can pull it off as I said I'll be the first to slap you on the back!
bountykilla0118;1277014 said:
You are right. I forgot to add that on their. Cant decide what to get yet. But I do need a turbo cant believe I missed that.