turbo oil lines

[Cya]

I have a few question about oil lines for a single turbo 1jzgte.

1.Would a -3 oil feed line be reliable?
2.How long would the oil feed need to be?
3.How long would the drain need to be?

 

[MDCmotorsports]

You'll have to make your own using a kit ****cough****.

-4 or -3 works.

 

[Quin]

Cough means go to www.mdcmotorsports.com and buy one

 

[86_sports_1jz]

I have a few question about oil lines for a single turbo 1jzgte.

1.Would a -3 oil feed line be reliable?
2.How long would the oil feed need to be?
3.How long would the drain need to be?

1. yes
2. depends how you run it, through the exhuast runners to the turbo or underneath the manifold then up to the turbo
3. again depends on how you run it just like the feed

my kit also came from mdc, a -4 for the feed and a -10 for the return. they were really helpful in helping me put together my oil lines. plus when i didn't get the right parts they were willing to send me more without cost

 

[tlo86]

yeah i wish i bought mine from MDC, i pieced mine together on suprasport and other places and it just ended up costing way too much

 

[MDCmotorsports]

yeah i wish i bought mine from MDC, i pieced mine together on suprasport and other places and it just ended up costing way too much

If it came from Suprasport within the last 4 months, it should have been an MDC kit.

If something is wrong, lmk.

 

[The Reaper]

i piecced mine together from summit and WOTM iirc. it wasn't too bad

-3 feed -10 drain

running a 60-1 so i didn't need to go to -4

 

[tlo86]

If it came from Suprasport within the last 4 months, it should have been an MDC kit.

If something is wrong, lmk.

nah the only probs i had was from the cheapo kit i bought before. they (the ebay dealer appearently) sent me a -3 feed kit and i had a -4 adaptor on the block so it was cheaper to buy the line from suprasport w/ 2 day shipping than to buy a converter and wait 2 weeks on shipping. and if you make their lines +1 to the quality of your stuff i really love them hehe

so now im stuck with an extra block adaptor an line converter -3 feed kit when i shouldve done it right the first time lol

 

[Cya]

thanks guys.

I also have another question. Where can I get a stock o2 sensor flange for my exhaust?

 

[MDCmotorsports]

You'll have to make one.

 

[tissimo]

bic sold them iirc (o2 flanges)

 

[T701jz]

Most Muffler shop carries all types of flanges for your exhaust. I fab my own feed line and I'm getting the return line from Aaron (Driftmotion) with the Arz flanges complete.

Noel

 

[Cya]

Most Muffler shop carries all types of flanges for your exhaust. I fab my own feed line and I'm getting the return line from Aaron (Driftmotion) with the Arz flanges complete.

Noel

Ill have to check then. How is the t70 spooling on your 1j? Im planning on running a MP T70.

 

[Jack]

If it came from Suprasport within the last 4 months, it should have been an MDC kit.

If something is wrong, lmk.

uh oh Jon...you make good lines but that one was mine.......hehe

I do admit you can weld a hell of alot better than I.:naughty:

 

[T701jz]

Ill have to check then. How is the t70 spooling on your 1j? Im planning on running a MP T70.

It spools pretty quickly and I know it will spools a lot better with my new set up.

Noel

 

[MDCmotorsports]

uh oh Jon...you make good lines but that one was mine.......hehe

I do admit you can weld a hell of alot better than I.:naughty:

I only try.

Was making sure the customer was happy. :love: