I am planning on swapping my clutch this weekend. It hit me yesterday that I want to have the Flywheel resurfaced in the process. I quickly found out that having it done on the weekend was going to be difficult. I was hoping to be able to borrow one to get it done on Friday, but found out late that it wasn't going to happen. So, I struck out after 8 o'clock last night pulling my tranny to get mine out and get it done. Well due to being old, having neck issues, and poor jacks, I am very slow. I the tranny out and pulled it from under the car as I found out that I would need a 12 point socket to get my ARP bolts out. So, at 1:30 this morning, very frustrated, I pulled the power from my light, leaving all of my tools where they were, and tranny in the driveway. Yesterday was absolutely beautiful, and today started that way too, so I planned to straighten up after work. Well, I couldn't have been more wrong. It did a pretty good bit of raining this afternoon, while the shifter hole was not covered at all.
So, what have I got to do about any rain water that may have entered. I am not completely sure what I need to do about draining a tranny. I tried to drain one off of one of my parts cars, and I pulled every plug in it, with no fluid draining from anywhere. That leaves me confused a bit, but I think that may have been an isolated case. What damage can come from this.
Cliffs.........It rained into my tranny....What do I do?
So, what have I got to do about any rain water that may have entered. I am not completely sure what I need to do about draining a tranny. I tried to drain one off of one of my parts cars, and I pulled every plug in it, with no fluid draining from anywhere. That leaves me confused a bit, but I think that may have been an isolated case. What damage can come from this.
Cliffs.........It rained into my tranny....What do I do?