Time to play: Name That Part!

old skool

old skool

New Member
Apr 17, 2009
92
0
0
Milwaukee
i have no clue what these all are, but i got them in a box with my car. i'm guessing i will be needing these so it would help to know exactly what they do. none of the bags are labeled and there is not parts list. Good luck!

(please list left to right, top to bottom, thx!)

p1359822_1.jpg


p1359822_2.jpg


and now this one, i know it's a head gasket..now, supposedly, there is already an HKS metal head gasket on the car, can't tell if this one is metal or not but there are no identifying stickers on the packaging, hopefully someone can tell:

p1359822_3.jpg
 
S

Satan

Supramania Contributor
Mar 31, 2005
1,594
0
36
Tampa
Looks like all parts of a headset... seals, gaskets, o-rings for when you have some head work done.

1st pic =
Top left baggy - Don't recongnize these, so must be for 7M somwhere... maybe waterpump?

Top right baggy - Long rectangular gasket is for the EGR recirc cap at the very back of head. I assume the others will be for where other things bolt to the head.

Bottom left is the throttle body gasket, bottom-middle is turbo/exhaust gaskets, and bottom right looks like the o-ring for the oil filter bracket. The smaller one may be for the same (I haven't seen 7M stuff in years).

2nd Pic =
Top left - various fule injector grommets/o-rings, front main seal, thermostat gasket/seal, etc. 2 seals to the right are the camshaft seals (behind the cam pulleys).
Bottom left are the valve stem seals (take them to machine shop if having them prep head), bottom center is rear main seal, and to the right of that are gaskets that look like they should be for exhaust, but I can't remember.

Not a metal headgasket. Looks to be regular composite stuff. Should work fine if staying stock horsepower.

If you have not disassembled the head yet, then you will be able to find the matching seals/gaskets as you remove intake, ehxaust manifold, etc.

Good luck!
 
B

BoostJunkie

New Member
Nov 27, 2008
70
0
0
Clarksville, TN
The head gasket looks like a regular graphite gasket. Of course the other gaskets are just the various ones. Keep them for when you need to rebuild the motor. Being a supra owner you will need to do this once in a while. As you rebuild it you will see where they all go.
 
JDMMA70

JDMMA70

Active Member
Dec 4, 2006
2,550
0
36
Houston
Water Pump, Rear Main Gasket, J-Tube Gasket, EGR Cooler, EGR Gaskets, N/A Upper Intake Manifold Gaskets, ISC Gasket, CSI Gasket, Throttle Body Gasket, Turbo Elbow Gasket, Turbo to Exhaust Manifold Gasket, Washers for Valve Covers, Cam Cover Gasket, Cam Seals, The big one could be either Oil Pump Driveshaft Seal or Front Main Seal, N/A Exhaust Gaskets, Regular Composite Headgasket.
 
You must log in or register to reply here.
Top Bottom