Thread Pitch Stock Fuel Rail

[futara_dan]

Does anyone know the thread pitch for the cold start injector banjo bolt? I got a FFIM with no cold start injector and I want to order a plug for it but dont know the thread size. Thanks.

 

[isnms]

12mm x 1.25

 

[futara_dan]

Thanks :icon_bigg

 

[shaeff]

^ yep.

 

[futara_dan]

One more question. Can I put my Aeromotive FPR in the dampener(i dont have it anymore) spot and the line that goes from the dampener in the FPR spot? Basically reverse the lines on the fuel rail so I can mount my AFPR up againts the firewall. I would think you could but I want to make sure, maybe im missing something.

 

[starscream5000]

Isn't the inlet/outlets on the fuel rail two different sizes? If they are, I wouldn't do it in fear of fuel starvation.

 

[dbsupra90]

Isn't the inlet/outlets on the fuel rail two different sizes? If they are, I wouldn't do it in fear of fuel starvation.

yes the supply side is 14mm x 1.5 and the return side is 12mm x 1.25

you could drill and retap the 12mm side.

 

[starscream5000]

That works :thumbup:

 

[futara_dan]

yes the supply side is 14mm x 1.5 and the return side is 12mm x 1.25

Ya, I knew I was missing something. Thanks.