thread pitch for bleeder on r154 slave cylander?
- Thread starter Supraboostin
- Start date
Supraboostin said:
Are you talking about the bleeder on the slave cylinder or the drain plug for the tranny?
I think its like an 8mm or 6mm. Can't remember off the top of my head. I'm about 1400 miles from my car. But, if you have a small pair of vice grips, that would probably be the best since those little suckers love to strip.
ok i guess i didnt ask the question right,i need to know the thread size of the bleeder screw for the slave
Supraboostin said:
Oh, I think that it is the same one that's on the calipers. So, if you have an extra one laying around, that might work.
werewolves182;680878 said:
Thread from beyond the grave:
Does anyone know the correct size for certain? I tired searching and only came up with people "Thinking" or "Guessing". I'd like to order a speed bleeder but don't know the size and am not in a position to measure mine, any help would be great.
Ah, I just found this thread with a google search.
Well I just asked Aaron(driftmotion) and he measured one and it is 10mm x 1.25 , so that's what I am going to try...
Well I just asked Aaron(driftmotion) and he measured one and it is 10mm x 1.25 , so that's what I am going to try...
Last edited: