thoughts on timing belt walking

[JDMMA70]

http://static.photobucket.com/playe...436/Cobra281s/20130528_093514_zps25c6d36d.mp4

Ok so my belt stops walking at that point mentioned in the video. My question is since I know I'm rotating the motor on the stand. Will the belt track straight once the motor is running?

Thanks

 

[kotu100]

How's it sit on the gears?

 

[JDMMA70]

Fine like normal tensioner is brand new toyota. Everything lines up

 

[kotu100]

Don't stress, it'll centerize itself when you crank it.

 

[Maple191]

Ah dont worry even if the belt flys off. The engine is non-interferance so no bent valves

 

[Poodles]

Missing the front guide on the crank timing gear could easily cause that...

 

[JDMMA70]

Its not missing either guide I checked that before I put the key on. The guide on my old one that used to be on my motor was missing as it would walk on the gears bad. This one just moved slightly on the tensioner and stopped. Didn't even move up top on the gears.

 

[Poodles]

New belt?

 

[JDMMA70]

Everything is brand new