Thermostat housing sensors

[kamikazemkiii]

Does anyone have a sensor diagram on the thermostat housing of a 90 7mgte i need to kno what they are and were they go

this one is not for my model

something like this

 

[gaboonviper85]

That pic is for all turbo models...my 90 housing is set up the same bro....call me if you need

 

[mk3supra]

Maybe this will help http://www.supramania.com/forums/showthread.php?t=70459

 

[Moy]

Is the A/C coolant sensor switch is for the fan (on turbo models) on the front of the a/c condenser?

Also, the auxiliary fan sensor... if I am going to be removing my auxiliary fan, do I still need the sensor?

If yes for the first question and no for the second, could I just use my non-turbo thermostat housing with only the BVSV on my turbo engine? (Do not have fan on a/c condenser, will probably be pulling out a/c system)

 

[giterboosted]

what exactly doesthe bvsv do? mines busted as crap, but my car works fine

 

[jdub]

Is the A/C coolant sensor switch is for the fan (on turbo models) on the front of the a/c condenser?

Also, the auxiliary fan sensor... if I am going to be removing my auxiliary fan, do I still need the sensor?

If yes for the first question and no for the second, could I just use my non-turbo thermostat housing with only the BVSV on my turbo engine? (Do not have fan on a/c condenser, will probably be pulling out a/c system)

Yes

No

Yes

what exactly doesthe bvsv do? mines busted as crap, but my car works fine

It allows the charcoal canister to purge to the TB when coolant warms above a certain temperature.

 

[Moy]

thank you jdub! you da man!

 

[hatchet9mm]

Sorry to revive an old thread and jack it, but does anyone know the thread size and pitch of the a/c and the cooling fan switch? I'm trying to do a clean install of my flex-a-lite fan controller and am trying to find a place to put my sensor, I figured I took my condenser fans out and my belt driven fan one of those will server my purpose after I have a bushing to fit in one of those holes. The controller will turn the fans on automatically based on the a/c if I want it to, so if I want to use that feature, which sensor should I replace. I have spent the last hour looking for part numbers and specs on these sensors with no luck on finding the type of thread they are.

 

[hatchet9mm]

No one knows?