The real skinny on sequential injection

[Pyro15D]

Hey all, I'm trying to set this AEM 30-1130 up on my car for sequential injection. The thing is, I am finding a bit of a problem with conflicting data. This is the thread I used. http://www.supramania.com/forums/showthread.php?140728-AEM-EMS-tuning-questions Anyway, how can I set this up? It isn't running well at all and I would love to activate this additional feature. I also heard to activate injector 10. Can anyone help me?

 

[hvyman]

7m? Did you wire it up for sequential?

 

[Pyro15D]

Shoot, yeah I forgot to add that. It's a 7M and it is wired for sequential already. Injector 4, 5, 6 to pins 10, 11, 12 on connector C.

Sent from my SCH-I535 using Tapatalk 4 Beta

 

[Pyro15D]

Well, I found out the problem. I forgot to enable injector 10. No idea why that needs to be enabled, but I read around and a few posts referenced enabling that. Anyway, it started right up. Now to completely redo my fuel map...

Sent from my SCH-I535 using Tapatalk 4 Beta

 

[8T7supra]

I thought the AEM 30-1130 was for 89-92 aka the 1JZ and the AEM 30-1110 was for the 87-88 aka the 7M?

 

[Pyro15D]

In the U.S., the 89-92 was 7m. We never got the 1jz for anything USDM. Anyway, yeah the AEM I got was for a later car. I cut the yellow connectors off my harness and put the newer grey ones on and it worked like a champ though.

Sent from my SCH-I535 using Tapatalk

 

[8T7supra]

ok I only ask because I am planning to do sequential injection on my car and wanted to make sure i did it right.