Tell me where this goes...

[Reign_Maker]

Ok, I have an "extra" one of these... I dont knwo where it goes... I THINK its a water line, but, I dont know... It might be an extra part I had from another build or my pile of old parts that got mixed in, but Im really confused...

 

[FredMk3]

Pretty sure it's the stock oil cooler to oil pan return banjo fitting.

here we go: http://www.cygnusx1.net/Supra/Library/EPC/291420/catalog.aspx?Figure=1503&Page=1
where the arrow points to, #15772A

 

[Reign_Maker]

Fred, thanks man, but that's not it... It's bigger than that... The one on the pan is "rounded" on the banjo section, this one is more hard edged... Also, I never took that one off my oil pan, new pan... Thanks for the pic though, it helps me remember how the oil lines go... Its kinda frustrating, because it's been 10 months since I tore this motor apart... Thanks for all the help guys...

 

[MDCmotorsports]

Jake, it goes in your butt.
MMMMMMMMMMMmmmmmmmmmmmmmmmmmmmmmmmmmmm!!!










No honestly it could be the power steering line? Or it could be the lower water line to the ct26 (on the thermostat housing)?

 

[FredMk3]

Well I'm confused. hehe

http://www.cygnusx1.net/Supra/Library/EPC/291420/catalog.aspx?Figure=1603&Page=2

checked the water line and I don't see a fitting like this.:icon_conf
and we don't really see where the turbo coolant hoses goes to.

 

[Tanya]

fuel filter line??

 

[FredMk3]

yep looks like this too.
http://www.cygnusx1.net/Supra/Library/EPC/291410/catalog.aspx?Figure=2211&Page=2

 

[Reign_Maker]

The banjo bolt WILL fit in the thermostat housing in the larger holes... But, I KNOW it wasnt there... Im just stumped... I got some extra left over parts from my machine shop when they closed their doors... He was all like, hey Jake I got a bunch of parts from some old supra motors, want them? Sure... So I got a thermo housing and a bunch of sensors and a a bunch of other small things, Im just wondering if this was one of them... I just wanna make sure its nothing important that I left out, thats all...

Tanya, I dont think its a fuel part because I havent messed with the fuel yet, just the fule rail...

 

[smokey]

i also was going to suggest fuel

 

[Tanya]

Tanya, I dont think its a fuel part because I havent messed with the fuel yet, just the fule rail...

Only reason I suggested it is because I swear I've seen it, or something close, on my car, and I obviously don't have a turbo or anything special,lol

 

[Reign_Maker]

Well, maybe it was an "extra" part that got mixed in with my other stuff...

Thanks for the help guys, and GIRL...

 

[MKIIINA]

It really looks like the stock ct26 coolant return line to me.... tomorrow ill go take a look at it and tell you for sure but my moneys on that....

 

[suprra_girl]

i don't think that goes anywhere to be honest... it's an almost similarity to the oil pan one but that has a slightly different angle
that banjo won't work anywhere else so bif it in the corner haha

edit: it's not the turbo one coz that does a 90deg iirc
and i do rc hehe
http://supra.co.nz/87tsrm/Turbocharger/tc09.htm

 

[koulee]

Its a coolant hardline for the n/a.

http://www.cygnusx1.net/Supra/Library/EPC/291420/catalog.aspx?Figure=1603&Page=1

middle right side #16281 B & D

It bolts into the thermostat housing.

 

[suprra_girl]

oh would you look at that

lol well done koulee

 

[Reign_Maker]

Thanks Koulee, for that, I give you a dark green square and a bright green square, lol...

So TECHNICALLY, I could use it for a coolant lin on my turbo, get rid of that stupid 90*... Thats just funny, sneaky NA parts gettin in my stash, lol...

 

[MKIIINA]

thanks Suze! I bent my coolant return line when I went to my SP61GT thats why I thought that was from there!

Good find Koulee!

 

[NashMan]

power streeing i think

 

[Raptor Racing]

:withstupi

Last Year my PS line took a crap...so I had a new line built after taking the line apart and that fittings looks horribly familiar.

 

[supraman7mgte]

no such thing as "extra parts" on a rebuld.
just stuff that i diddnt need