Tec2 Standalone?

[Fuzz420]

Can you help me find some info on this unit. I tried googling to find a main site but i couldnt find one. I know theres a newer version out the tec3, but i need info about the tec2.

I have an opportunity to trade my maftpro out and go full standalone I dont have any crazy hp goals,maybe 500hp w/ racegas everyblue moon, but thats about it. Also this will be for tuning on my na-t. I just want the best affordable tuning possible. If theres any reason why i should or should not trade my maftpro for a tec2 speak up(unless your trying to get my trade )

Any help is appreciated.

 

[NashMan]

http://www.directignition.com/pdf_files/tec99.pdf

 

[Fuzz420]

Thanks nash

 

[Fuzz420]

Nobody else have anything to add :dunno:

Would i be a fool if i didnt do this?

 

[Zazzn]

Many people don't have good things to say about the tec, however, lots of rotery guys love it.

 

[figgie]

hmm guess beating Duane to this post

The tec2 works fine. Just be mindfull of the ECU prom that MIGHT dislodge (Duane was lucky, Melloyello was not). Also the tec2 just like the tec3 and tec3r require a 60-2 crank trigger wheel be fitted on the crank.

For ideas check out Duane (upgradedsupra) or Ultra7m (over in the car domain) for crank trigger ideas

 

[NashMan]

it is good stand alone i just dont wana snow ball no more

 

[upgradedsupra]

Tec was great but MoTeC FTW! :biglaugh:

Duane (I had to )

 

[Evilempire1.3JZ-GTE]

electromotive TEC is ok and can run anything but you need custom spak and ignition components so if you want to keep the stock stuff for 1jz/2jz it sucks.

like he said above you need to fabricate your 60 tooth sprocket to your crank pulley and tec2 is verry old late 90's early then tec 3 came out around 4-5 years ago.

 

[NashMan]

you can buy a tigger wheel and bolt it on

electromotive TEC is ok and can run anything but you need custom spak and ignition components so if you want to keep the stock stuff for 1jz/2jz it sucks.

like he said above you need to fabricate your 60 tooth sprocket to your crank pulley and tec2 is verry old late 90's early then tec 3 came out around 4-5 years ago.

 

[figgie]

Tec was great but MoTeC FTW! :biglaugh:

Duane (I had to )

no no no

Motec + CDI8 + Mercury Marine Coils = NitroMethane Burning engine FTW. And no I am not kidding

btw on that note... I know what you running ignition wise but what are you running coil wise? 2jz coils?

 

[Fuzz420]

Thanks for all the replies.

I just called tec to ask about the wheels,and they said shouldnt be a problem. He told me they didnt have a 7m specific wheel. Does anybody know what size i would need.They offer a wide variety of sizes.

 

[John Reed]

no no no

Motec + CDI8 + Mercury Marine Coils = NitroMethane Burning engine FTW. And no I am not kidding

btw on that note... I know what you running ignition wise but what are you running coil wise? 2jz coils?

He is running 2JZ coils.

 

[figgie]

He is running 2JZ coils.

Hey John,

nice of you to be onboard here

btw Might give you a jingle on the RayChem DR-25 stuff Had to put it on hold while some work was performed on the car

 

[John Reed]

Hey John,

nice of you to be onboard here

btw Might give you a jingle on the RayChem DR-25 stuff Had to put it on hold while some work was performed on the car

Good to be here! Seems like a pretty low key forum, I like that.

I usually stock quite a bit of the DR-25, and can get whatever you need. You can PM me here or just hit my email up if you need anything.

 

[figgie]

Good to be here! Seems like a pretty low key forum, I like that.

I usually stock quite a bit of the DR-25, and can get whatever you need. You can PM me here or just hit my email up if you need anything.

yes we are low key

and I will on the RayChem I think titan said the same thing you just said (about you are the man on the raychem DR-25 stuff )

 

[upgradedsupra]

yes we are low key

and I will on the RayChem I think titan said the same thing you just said

RREV FTW!

Oh yeah Welcome John :biglaugh:

Duane

 

[NashMan]

talk about high jacked

they do ahve one it tad bigger then teh 7m balnercer all you need to do is drill 2 holes and bolt it on

 

[figgie]

talk about high jacked

they do ahve one it tad bigger then teh 7m balnercer all you need to do is drill 2 holes and bolt it on

or you can do what duane did and machine the 60-2 teeth right onto the crank Makes for cleaner look