quick question, how do you know when the came gears are at tdc? i just see one line on the gears on mine
Tdc
- Thread starter TooRandom
- Start date
Theres a back platebehind the cams that has a notch. Line the lines on the cams with the notches on your back plate and that will be TDC. Also you will want to make sure the cam is lined up with the middle dow on the cam itself and the crank gear should be straight up and down
Last edited:
Kckazdude;1088556 said:
cosign. made no sense to me. also is there a special sequence to remove the cam shafts?
the cams are at top dead center when the notch on the cam gear teeth line up with notch on the back plate.
gaboonviper85;1088953 said:
What are you talking about. Thats exactly what I said. I was just on my way out the door. I was typing to fast and wasnt paying attention to my spelling... Another classic example of supramania members being assholes....
NewGen;1090201 said:
Not assholes.
Just that your post was bullshit. If you are typing fast. Make damn sure to proofread the damn post before pressing "Submit reply".
I read the post prior to the edit and it just sounds like freaking corky from life goes on, contracted some autism plus perhaps a dash of touretts (imagine downsyndrome kid mashing the keyboard) and it just happens that it was barely readable. (no offense to anyone that carries any of the above mentioned syndrome!).
You want to be taken serious? type in a concise, coherent way and not that catastrophe you did.
Teh internets is serious buisiness!
We all could have had a little laugh at NewGen lining up the lines on his games and lined up with the middle dow... which I thought was pretty funny.
Gaboonviper was kiddin' around by saying 'epic fail', and merely poking fun...
Clearly the guy knew what he was talking about and had something to contribute, give 'em a break!
We all could have had a little laugh at NewGen lining up the lines on his games and lined up with the middle dow... which I thought was pretty funny.
Gaboonviper was kiddin' around by saying 'epic fail', and merely poking fun...
Clearly the guy knew what he was talking about and had something to contribute, give 'em a break!
I can understand the first few posts but that last one was just fucking rediculous theres absolutely no fucking reason to rub it in. I appoligize for my mispelling im not even going to bother next time... If it was poking fun I'd expect a haha or lol behind it
No need to take things so seriously, it's just the intraweb
If you do however want to be taken seriously, those of us who get respect around here review their posts or take the time to write it coherently to begin with...
If you don't have time to write a post properly, just don't bother, come back when you do have time, the forums aren't that important.
If you do however want to be taken seriously, those of us who get respect around here review their posts or take the time to write it coherently to begin with...
If you don't have time to write a post properly, just don't bother, come back when you do have time, the forums aren't that important.
Jaguar_5;1090251 said:
Alright I will keep that in mind next time. I appoligize for blowing up on everyone.
I hate to point this out, as I agree with figgie to the extent that one should make some effort to be decipherable with regard to one's posts. However, there isn't one post in this thread (with the exception of mine) that's grammatically correct or punctuated/spelled correctly.
I just wanted to take this opportunity to be superior. No thanks are needed.:sarcasm:
I just wanted to take this opportunity to be superior. No thanks are needed.:sarcasm:
NewGen;1090238 said:
Pull your pants up sally!!! It's all in good humor....with a pinch of seriousness