Targa top problem please help

88mk3turbo

New Member
Jan 25, 2009
20
0
0
lynn mass
on my way home coming from buying my supra everytime i hit a bump i noticed the targa top would rattle and was loose. i pull over and go to tighten it. the two front screws were tight. i look to tighten rears and they are completly missing!!??? so it jus comes loose after like 5 minutes of driving and rattles horribly on bumps. how can i get those bolts back in. and im guessing ill be heading to toyota to buy the factory screws. any input would be helpfull thanks in advance
 

roundfinger

Supramania Contributor
Aug 23, 2006
258
0
0
Pensacola, Florida, United States
I had a rear targa bolt that was sheared in half on a car i bought. I had to drill out the old bolt. You are lucky you wont have to be so involved.
All the parts i needed i was able to get from toyotaworld.com aka champion toyota. I had to get a new bolt, and retaining clip. Everything else was usable. I replaced the side targa seals at the same time as I had to take the targa apart to get my rear bolt covers off on the targa. Its really simple honestly and shouldnt take more than an hour doing the seals as well.