i have a 1988 5spd mk3 toyota supra. I have the older box taillights on the old mk3's. I was wondering if there is a way i could convert them to the taillights on the 1991 an 1992 mk3's??
taillight conversion
- Thread starter drift feen
- Start date
3rd time is a charm on the posts... Anyway tons of people have done it. I haven't so I'll let the others fill you in. Its pretty simple as far as I know.
all the holes should pretty much line up but you will have to drill for the center section if im not mistaken it simple
it's super easy. you drill just a few holes, small ones, and they bolt right on.
for future reference, NEVER post your topic twice. if you post your thread in the incorrect section, a moderator will move it for you. dont post another topic.
-shaeff
for future reference, NEVER post your topic twice. if you post your thread in the incorrect section, a moderator will move it for you. dont post another topic.
-shaeff
hey, my computer was freezing so I clicked it a couple times and it got submitted twice:icon_conf
I did it a few weeks ago. The two pieces on the sides are direct bolt-ons. You need to drill two small holes only, for the center piece. You will know which holes once you're doing the installation. It's holes for two screws that are on the center piece's moulding, on both extremes. Piece of cake.
my pre 89 bolted right in my 87. kinda had to drill the hole a little bigger. get new gaskets. coast about 40.
Pre-89 taillights rule!!!!!!
It's disfigurement to put on those 89 tailights!
Pre 89 front-ends rule as well....rethink it!
It's disfigurement to put on those 89 tailights!
Pre 89 front-ends rule as well....rethink it!
