t3 header for 1jz

[rwd]

i'm searching for t3 header for 1jz, they're hard to find.I don't understand that all online shop only sell t4.The only t3 i saw, is on ebay but they're look bad

is it ok to put an t3/t4 adapter on t4 header?
where can i find a good t3 header for my 3082r?

 

[foreverpsycotic]

I have an XSpower manifold. Looks freakin mint. If you want, I will post up pictures of it.

 

[slideways2004]

I have an XSpower manifold. Looks freakin mint. If you want, I will post up pictures of it.

please do. i'm looking for one also. i ended up buying the crappy ebay ones but i really don't like it

 

[foreverpsycotic]

Ask and ye shall recieve
Sorry for the shakey hand, its cold in my basement. Also appoligizing for the dust on these parts, I have been slacking hardcore.

BTW, that is dust on the inside of the manifold, not rust.

 

[suprahero]

I thought XS power was the ebay manifolds. I have one of them as well in my garage. After Mike sells his, if someone else needs one, send me a pm.

 

[foreverpsycotic]

I thought XS power was the ebay manifolds. I have one of them as well in my garage. After Mike sells his, if someone else needs one, send me a pm.

I aint sellin you silly hillbillie.

Although, if they want I can sell a full single kit minus hardpipes for 1200.

 

[suprahero]

OH, my bad. I have two of them actually, but one of them had a small exhaust hole in it, but I had it welded up. The other one was only on my car for about a month and I decided to go with a Drewgo manifold. It was three times the price, but it was four times the manifold............:biglaugh:

 

[rwd]

where can i see drewgo manifold?

i already have xspower , but its like ebay stuff

i want flange angle for turbo and bigger wastegate tube ; like this:

but my question is , is this adapter ok ?? anybody already used this

 

[rwd]

where can i see drewgo manifold?

i already have xspower , but its like ebay stuff

i want flange angle for turbo and bigger wastegate tube ; like this:

but my question is , is this adapter ok ?? anybody already used this

 

[GeneStarWindGSW]

if someone has cheap manifold, i'll buy it =]

 

[suprahero]

Send a pm to Drewgo on here. He sells them and they are exactly what you want.

They come a t4 flange, but I drilled four holes in mine and then welded studs into them and installed my t3 flanged gt35r. I would have bought the adapter if I knew they made them though. That steel drewgo uses ate up about four drill bits and I also ruined a brand new tap and die set trying to thread the holes. I ended up having to weld in some bolts instead.

 

[rwd]

why almost all 1jz header are t4 , it's not a bit too large for just 2.5 l

 

[suprahero]

why almost all 1jz header are t4 , it's not a bit too large for just 2.5 l

My turbo had a t3 flange on it.