t-stat question

[montego6500]

ok so i am trying to search but all i get is this

Your submission could not be processed because the token has expired.

Please push the back button and reload the previous window.

wtf is that and this is not the first time. back to the question.

the jiggle valve on t-stat leave it in or take it out and does it go up or down?

thanks

 

[hvyman]

cut it off.

 

[Who]

Place the jiggle valve / air bleeder hole up 12:00 o'clock position. The hole or jiggle valve helps purge the coolant system of trapped air which rises to the top in the coolant pathways.

 

[Zumtizzle]

drill a 1/8 to 1/4 inch hole after cutting it off.

 

[jdub]

Personally, would not go over an 1/8"...too much flow will excessively delay warm-up. I left the hole as is when I cut the jiggle valve off....works well even in the Phoenix heat.

 

[IJ.]

Personally, would not go over an 1/8"...too much flow will excessively delay warm-up. I left the hole as is when I cut the jiggle valve off....works well even in the Phoenix heat.

^ Ditto on this the hole works well at stock size.

 

[Zumtizzle]

i have got to stop getting my automobile advice from locals.

 

[IJ.]

i have got to stop getting my automobile advice from locals.

Or find a local that actually knows stuff!

 

[Zumtizzle]

^Parts Counter Guy about 22 with an ASE in Parts Sales. My new local that knows his stuff.

 

[montego6500]

you guys are funny thanks for the advice. i cut it off and put it back together. so far so good.

whats with the search button not working.

 

[Moy]

you guys are funny thanks for the advice. i cut it off and put it back together. so far so good.

whats with the search button not working.

works for me