Supra8903's Build Up

supra8903

New Member
Jan 12, 2006
512
0
0
39
Latham, NY
UPDATE PHOTOSHOOT POST # 19 !!!



Ok.... Finaly i'll start a thread....


I purchased this car in the fall of 2002, after it was sitting for a long 5 years. The car was is such bad shape that a total overhaul was the only solution. Thanks to Northway Toyota and my father, the car was stripped to bare metal and completely restored to factory condition. This didn't last long once I acknowledged the potential of this awesome vehicle. This is where it all began in the spring of 2003, I promised that I would make my Ma70 Supra the best old-body on the East coast.


** I just would like to say that nothing on this car would have been possible without this forum...... So please ask questions, give coments, and feeedback.




***** P.S. ITS NOT EVEN CLOSE TO BEING DONE******









Here is a current mod sheet and some current pics:


Under The Hood
K & N filter
Greddy Type-S bov
Cooleze Turbo Inlet Pipe
HKS 3000 pipe and Hard Pipe kit
ARC Intercooler
NX N-tercooler Fogger
Greddy Profect B Type 2 boost controller
Apexi SAFC II
RC 550 injectors and clips
LIPP Lexus AFM
BIC 3” downpie with turbo elbow
BIC 3” testpipe
RSR GT-2 85mm Turbo exhaust
Re-torqued headgasket
Flexalite electric fan kit
Greddy radiator cap
PWR Radiator
Cooleze radiator pipe
Lipp intercooler block off plate
Redline water wetter

Stiff Stuff / Transmission
Trust Grex front strut tower bar
H & R Racing springs
HKS TEMS Controller
Tokico Illumina II struts
Toyota Electronic Modular Suspension (TEMS)
Redline transmission fluid
SPEC stage 3 carbon clutch
Techna stainless steel braided clutch line

Rollers / Stoppers
Super Advan SA3R 17inch rims
Gorrilla valve stems and lug nuts
Bridgestone Potenza 215 45 ZR17 tires
Brembo Blanks
TRD Pads
DuPont caliper paint

Inside
2 Corbeau TRS Suede Racing seats
3” Corbeau racing harnesses
Corbeau brackets and sliders
Lotek dual A-pillar pod
Momo Corsa Steering wheel and hub
Gau Donglih Quick release
Momo Race shift knob and e-brake w/ boot
Autometer Carbon Fiber Boost Gauge
Autometer Carbon Fiber Air-Fuel Gauge
NA voltmeter
AEM EUGO wideband kit
Titan Motorsports Harness bar
Twin NX 10lb bottles with gauges
Rear seat delete
Carbon Fiber vinyl door inserts

Outside
Bomex 3-hole front lip and sideskirts
VIS rear skirts
JDM rainguards
Euro turn-signals
2005 Sienna Hids
Hella H4 headlight conversion
TRD front plate
TRD plate covers
Shaved rear wiper
Shaved front grill emblem
Custom vinyl graphics

ICE
Clarion 7" in-dash DVD
Audiobahn Aw1205Q sub
Audiobahn A18001dt mono amp
Lanzar Vibe 420 4channle amp
Monster cable 1F cap
Monster cable wire and fuseblock
Custom fiberglass enclosure
My Sponsors:

Northway Toyota
727 New Loudon Rd.
Latham NY 518-781-1951

Original Soundz
2067 Central Ave.
Albany NY 518-456-7700

Nitrous Express
5411 Seymour Hwy.
Wichita TX 940-767-7694

HorsepowerFreaks
12905 Nr Airport Way
Portland OR 503-256-5600

CORBEAU USA LLC
727 West 14881 South, Bluffdale
UT 84065 801-255-3737

Meguiar's Inc.
17991 Mitchell South
Irvine, CA 92614

Ill fill in some pics here in the early years:
.
.
.
.
.



Here is the car as it statred off 2007:

The big changes form '06 were the colormaching of the Advans:

p760738_1.jpg

p760738_2.jpg

p760738_3.jpg


After selling by Corbeau Forza seats to shaeff, I opted for FX1 (fiberglass buckets).... they were not so comfterable, so they were soon swaped for TRS Microsued seats.

In addition this spring I colormatched my nitrous bottles, as well as made a fiberglass boxfor my subs.

I also ditched the HKS exhaust and went with a RSR GtII


Here are some pics from April, and May:

p760738_4.jpg

p760738_5.jpg

p760738_6.jpg

p760738_7.jpg

p760738_8.jpg

p760738_9.jpg

p760738_10.jpg
 
Last edited:

supra8903

New Member
Jan 12, 2006
512
0
0
39
Latham, NY
After going to HIN Boston and taking Best mild Toyota and 3rd place 2 door, I have to make some changes.

Went with a PWR radiator as well as some Corbeau TRS in Microsued with 3" racing belts

here are some pics from June:

sm_photo_missing.jpg

sm_photo_missing.jpg

p760744_1.jpg

p760744_2.jpg

p760744_3.jpg

p760744_4.jpg

p760744_5.jpg

p760744_6.jpg

p760744_7.jpg





and heres some random pics this year:

p760744_8.jpg

p760744_9.jpg

p760744_10.jpg

p760744_11.jpg
 

supra8903

New Member
Jan 12, 2006
512
0
0
39
Latham, NY
With me being short on money... im trying to sell all my stock parts, so i can save my ride. I did make a good purchase a few weeks ago.... i don't know if im gonna use it though:

sm_photo_missing.jpg

sm_photo_missing.jpg






in addition I bought a daily driver (present to myself for graduating college)
is an 06.5 Scion Xb RS4

here are some pics..... nothing crazy, just a stereo and some Rays...

p760746_1.jpg

p760746_2.jpg
 

supra8903

New Member
Jan 12, 2006
512
0
0
39
Latham, NY
I had a profesional photoshoot a few weeks ago and i will post the pics when they are done editing:

here is a sample....
sm_photo_missing.jpg
 

iwantmybaby

New Member
Sep 19, 2007
2
0
0
35
michigan
very nice, havent got my first supra yet, but when i get it i hope it looks something like that, like i looked at it in astanashment like DAUUMMMM thats a nice car, now i know your not gunna see it but what would it be able to go for to the right person, im kinda new with supras and thats a very nice one how much could it get.



thank you,
Justin
 

suprahero

naughty by nature
Staff member
Aug 26, 2005
14,971
0
36
54
Roll Tide
Looking good as usual. I want to see pictures of your fiberglass box you made if at all possible.
 

supra8903

New Member
Jan 12, 2006
512
0
0
39
Latham, NY
Ok.... ill do some " where i have came from"

this pic is from the spring of 2005.... I was thrilled with the install of my Bomex 3-hole front lip, and my Motegi Mr7s:

sm_photo_missing.jpg



Later i that summer I decied to add the Bomex sides and Do-luck style rears.... At this point I hav the Advans on order:

sm_photo_missing.jpg


These are a pic of the Advans when they first got here (they came of a skyline):

sm_photo_missing.jpg



And here they are installed on my car in the spring of 2006:

p762086_1.jpg


p762086_2.jpg


p762086_3.jpg


p762086_4.jpg


p762086_5.jpg


p762086_6.jpg
 

supra8903

New Member
Jan 12, 2006
512
0
0
39
Latham, NY
As you can see the advans were pretty beat up, so they were sent out to be refinished.....

They are much better now.....


and for thoes that criticise the stickers.... here is what Meguairs sent me for my sponsorship:


p762091_1.jpg



hell ya... gotta love free stuff.
 

supra8903

New Member
Jan 12, 2006
512
0
0
39
Latham, NY
a few reasons....

first this never see rain, also it looks cleener. I also used a small blade so it doen not rub the banner
 

supra8903

New Member
Jan 12, 2006
512
0
0
39
Latham, NY
Ok... Like I was saying I had a professional photoshoot a few weeks ago.
One of the photographers finaly got his pics edited..... so here they are, There is also going to be a feature of www.rspeed.org, a cool site you should check out.

well here are one set of the pics:


p766740_1.jpg


p766740_2.jpg


p766740_3.jpg


p766740_4.jpg


p766740_5.jpg


p766740_6.jpg


p766740_7.jpg


p766740_8.jpg


p766740_9.jpg


p766740_10.jpg


p766740_11.jpg


p766740_12.jpg


p766740_13.jpg


p766740_14.jpg


p766740_15.jpg


p766740_16.jpg


p766740_17.jpg


p766740_18.jpg


p766740_19.jpg