Supra Experts...help me find the source

[canadian]

I recently took out the engine (7MGTE) out of my '87 supra. I forgot to bag a few bolts because I was in a rush to get it done and finish (I know, I know...bad excuse)...

I forget where these bolts came from, I am 90% sure they came from below because of the slightly rusted and dusty color.
There are a total of 6 bolts, 4 "long" and 2 shorter sized.
Here is a picture of one:

Any help? I would liketo label this asap.

 

[The Reaper]

seeing that it has the bigger washer around it. it looks like one that holds the lower plastic under panels in place.....

 

[Ckanderson]

bolt size?

 

[theKnifeArtist]

that bolt'll probably fit in a million holes

 

[plaaya69]

I wish I can help you because I know where tons of the bolts go but that is a very tricky.

What size socket fits that/ those bolts?

 

[buckshotglass]

I guess the trans to motor cast brackets. The longer bolts go on the passenger side, into the motor in the USA.

 

[canadian]

I guess the trans to motor cast brackets. The longer bolts go on the passenger side, into the motor in the USA.

I think I may agree, that is very likely.

I will get the socket size in a minute...

 

[canadian]

The heads on the bolts take a 12mm socket.
The long bolts are approx. 7/8" excluding the head.
The short bolts are approx. 3/4" excluding the head.

 

[buckshotglass]

If they are 12's, they aren't what I said. The motor/trans bracket bolts are 14mm.

 

[canadian]

okay..anyone else??

 

[figgie]

those loko like the bolts that hold the transmission crossmember in place. Shuold be four of them though not 2.

 

[Larry_A]

The pics appear to be the bolts that hold the DS center bearing carrier, which are two [2] in number. The thick washer is the give-away for them.

If the other four [4] have thinner washers, they are likely trans-eng mount fasteners.

Good luck.

 

[SupraMario]

seeing that it has the bigger washer around it. it looks like one that holds the lower plastic under panels in place.....

Dido, I've seen these things a lot, I got a bet that says thats what it is.

 

[canadian]

That makes sense. Maybe I put them together when I was taking it apart...thinking they belong together.
Thanks, I think thats what they are...

 

[tte]

Any numbers or marks on the head?

Cheers,
Roy