Suggestions for Replacement Lines to and from the Oil Cooler

[Yawgmoth]

Over winter I added in the driftmotion Intercooler (yeeeah the new one, sadly, not the old version) and had to relocate my oil cooler. With zip ties, I could just strap it down, somewhat in the same spot, but I want to move into a better location since it's almost spring and my winter projects are nearing completion.

In trying to find lines (3/8 ID, based on my own measurements and the internet) I can't find a PTFE line anywhere that is that size. It does not work with -6AN and -8AN.

Has anyone replaced lines? If so, what did you use?

 

[Asterix]

Do you still have the factory pressure-based oil cooling system? If so, you should replace everything with a thermostat-based system.

 

[Yawgmoth]

I do have the factory system. I just needed some slack. I'll upgrade at some point.

 

[Asterix]

This is good hose for oil, and is available 3/8" ID. You don't need PTFE. https://www.pegasusautoracing.com/productselection.asp?Product=3290

 

[Bru]

I bought a 25 foot box of Derale 13017 (Continental, ContiTech) 3/8 engine oil/transmission/ power steering hose to replace the oil coolant circuit and power steering low-pressure lines. 10 years later I'm still using hose from the box.

Maker website.