Stocking up on parts some input wanted

[Hadleyhaha]

Hey guys I've started sourcing parts for my car and wanted some input on where to go from here.
I guess I'll start buy listing my power goals first.

I'm shooting for around 500hp
Keep in mind I'm buying this stuff as deals pop up I'm in no rush, so if parts purchase seems random it is.

Things I have
God speed turbo manifold
PTE 550 cc injectors with no clips top mount
Cometic head gasket
ARP headstuds
Gates timing belt kit
And installed on the car is a apexi N1

I'm pretty sure I want to do a rebuild on the whole bottom end for piece of mind so what I'm looking for is some advice on what should be definitely replaced.
Thanks justin

 

[IJ.]

Personally I'd go larger injectors so they have a bit of overhead left at 500...

 

[Hadleyhaha]

Okay I'll put those up for sale what size would you go with?

 

[IJ.]

I ran 1000's in my 7M for 550rwhp, they were old RC's so required full sequential operation to get good idle quality, more modern injectors may be ok with the stock ECU if you drop base pressure a bit to compensate.

 

[Hadleyhaha]

Okay thanks man

 

[Poodles]

Engine management?
Turbo?
Downpipe?
Intercooler and piping?
Fuel pump?
Internals?
Clutch?

There's more but that's the big stuff off the top of my head...

 

[Hadleyhaha]

Was gonna use aem ems v2
A gt35r
3" IC piping and a front mount
Walbro fuel pump
Tail 44mm wg
Wasn't sure about pistons and rods.
And some type of twin disc clutch I guess

 

[Hadleyhaha]

I just know there is a lot of small stuff I'm not thinking of that I need to be told about replacing. I'd hate to cover all the basic things and miss something vital I looked over.

 

[Hadleyhaha]

Okay guys I'm gonna purchase some parts in a few days when I get a chance also. I've made a small list of things I feel in need before I start trying to make the car faster, so I'm gonna spit this stuff out and would like if you guys could tell me if you'd add or take away some stuff. I have another $2300 to spend to I'm all ears.
Thanks Justin

This has no order. Just randomly wrote down so I'm spitting it out the aame way

New stuff
Water pump
Heater hoses
Radiator hoses
Trust washer set
Rod bearings
Main bearings
Arp rod bolts
Arp headstuds kit
Cometic head gasket (what size?)
Gates timing belt kit
Exhaust mani gasket
Bottom end gasket
Power steering belt
Timing belt tensioner
Steering rack bushing
Sway bar bushings
Front control arm bushing kit
Rear sway bar bushings
Rear toe links
Front disconnect away bars
Steering rack spacers
Brake master cyl
NRP pistons
Power steering pump
Oil cooler
Shimmed oil pump
Polyurethane motor mounts
Rear wheel seals
Wheel bearings
Subframe bushings

Add anything else you can think of whiting reason of what I said I have left to spend. For now.
Getting most all this stuff from drift motion btw

 

[Hadleyhaha]

I really want to try and keep my entire build under 10k anymore than this and I'm likely to not get laid for a while

 

[IJ.]

I really want to try and keep my entire build under 10k anymore than this and I'm likely to not get laid for a while

LMAO I had 7K just in the head of my 7M

 

[Hadleyhaha]

Yeah I'm not trying to do all that at once, and if I need 7k in the head of a 7m to make 500hp I'm gonna do a lsx swap in it.

 

[Hadleyhaha]

LMAO I had 7K just in the head of my 7M

I don't think I would be aloud inside the house if I did something like this right now lol

 

[atmperformance]

I really want to try and keep my entire build under 10k anymore than this and I'm likely to not get laid for a while

what are you talking about the supra is a dick magnet!

 

[Suprapowaz!(2)]

truf!

 

[Hadleyhaha]

what are you talking about the supra is a dick magnet!

na I've never looked at it that way haha