hey whats up. ive got a 1jz twin turbo mkIII. im wondering what the stock fuel injector limit is as far as power goes (i.e. increasing boost). ive got a walbro 255 fuel pump installed already and would get a safc before messing with the boost levels. can i safely increase the turbo psi on my stock injectors? and if so, how much? thanks for any help
stock injector limit
- Thread starter kozzman555
- Start date
Stock turbos will likely fail before you hit the limit of your injectors.
340ish whp is about the highest those injectors can take, or the highest I would trust them.
340ish whp is about the highest those injectors can take, or the highest I would trust them.
get an aeromotive fpr if you dont already have. stock 1jz goes pig rich at about 5k. i wouldnt mess with an safc unless you have a wideband either. i wouldnt go anything over 17ish psi though the twins fail at higher boost levels
it seems i have diff people saying diff things. basically what i want to know is what do i need to do (other than buying a boost controller and fcd) to safely boost 17psi on my stock twins?
RockPaperSwoRD;1428952 said:
kozzman555;1429385 said:
They answered your question you just didn't read it all. Sure your Fuel pump is important but if your running stock injectors then that only leaves the Aeromotive FPR and/or a piggy back or standalone.
lol im sorry. i misread what dylan jz wrote. thanks for keeping me straight. i appreciate everyone's help