i just replaced my head gasket, now it wont start, it was running when the old hd gskt went, never over heated, i have fuel, spark, and my timing is good,heads not warped, everything seems to be plugged in and everything, it cranks, but never starts up... im clueless now
starting problem
- Thread starter supratj
- Start date
yeah i know that, thats why im clueless as to why it wont start up.... it cranks over, but wont start up....
I doubt you have spark.
Check to make sure there are the (4 wires, 2 and 2 paired together) brown and white grounds back on the head and ARE TIGHT.
The only other thing that would keep you from starting is you
A.) Have a bad afm
B.) Hooked the fuel lines up wrong
C.) Blown EFI fuse
Check to make sure there are the (4 wires, 2 and 2 paired together) brown and white grounds back on the head and ARE TIGHT.
The only other thing that would keep you from starting is you
A.) Have a bad afm
B.) Hooked the fuel lines up wrong
C.) Blown EFI fuse
thanx guys, but i found the problem, cam position sensor, i got it started, but i just replaced the head gasket not even a week ago, and i blew the new one yesterday... head was not warped, everything was torqued, i used arp bolts, i dont see how it did it... but if you guys know anyone who wants to buy it for $2500 let me know
Last edited: