I have been having starting troubles. I had a bad AFM electronics box and a bad CPS (failed one out of the 3 Ohm tests). I replaced both with working units. The spark plugs and wires only have 1,000 miles on them. The 3 coil packs are brand new and the coil pack ground wire is brand new and grounded. Battery is new and the ground for the battery is new (end of the ground wire snapped in my hand so I replaced it). I set the timing according to TSRM, marks are perfect, everything lined up the way it should.
The test for the igniter is mostly on the harness side and it passed the first test for the 12 volts of power (my multimeter showed 12.5). The second test showed a 3 volt dry cell battery for the test - where do I get this?
The test for the igniter is mostly on the harness side and it passed the first test for the 12 volts of power (my multimeter showed 12.5). The second test showed a 3 volt dry cell battery for the test - where do I get this?
Last edited: