single turbo 1jz oil feed blocking, coolant lines, vaccume hoses

[1wickedA70]

hey guys just wondering what did you single turbo guys use to block off one of the oil feed lines on the block? which coolant lines need to be blocked off exactly? and which vaccume lines do you have to block off if any?

also i see a small vaccume line that runs behind the head to the intake manifold, i think it was for the stock bov? do i have to block that off?

 

[1jzMoe]

Call up Driftmotion, i know that they have piece to block off the extra oil drain line. As far as the coolant lines, unless your turbo has water cooling, block off all the old coolant lines that used to go to the twins. and block off whatever vacuum lines you are not using

 

[IBoughtASupra]

Blocking Coolant lines off are not that good of a things. Coolant needs to be recirculated to let the thermostat know when to open. It is the same reason some people drill out the little notch type fitting on thermostats and another reason DriftMotion sells a coolant bypass line for the 7M.

 

[1wickedA70]

prick, get the fuk out of my thread now! ^^ lol

---------- Post added at 12:14 PM ---------- Previous post was at 12:12 PM ----------

thanks ill call up driftmotion..anyone else wanna chime in

 

[IBoughtASupra]

Wow, just offering help so you don't fuck up your motor, but go ahead. It is your JZ.

 

[suprastanger507mgte]

Blocking Coolant lines off are not that good of a things. Coolant needs to be recirculated to let the thermostat know when to open. It is the same reason some people drill out the little notch type fitting on thermostats and another reason DriftMotion sells a coolant bypass line for the 7M.

B4 helping....read what the OP is needing help with. wtf??

OP , I used a bolt with the same thread size and put some loctite on the threads and sealed it off. Never leaked.

 

[1wickedA70]

can u remember what bolt you used? thread and size?

 

[1wickedA70]

what do i do with these coolant lines?..one from the 2j waterpump and the other towards the back of the exhaust side of the motor

 

[1wickedA70]

anyone?

 

[1jzMoe]

well i just got a hose and connected those two together, i havent had a problem.