Silver Bullet aka the DD

[K_SHAN]

UPDATE.. More in the meantime stuff.

Didn't like the Polished look for my 89.. so testing out flat black and blue bolts! I like it. its just painted for now but will be PC'd very soon..

OH what happened to the turbo? it disappeared. :scratches head:

 

[K_SHAN]

 

[K_SHAN]

Update..

Precision 71GTQ Billet wheel, .81 turbine housing.

thanks to MR.Pugh..

 

[K_SHAN]

UpDate!

Thanks to MR.Kevin at Chasebays.com.. its been A Long time because they Use brand new connectors and all. Each harness is custom made to the car, Motor combination and all of the different brands of sensors, types of sensors used.. Unfortunately I did not have the Funds for the Cm Mil-spec harness. So I went ahead with the Cm-1 ( I actually have mil-spec bulkhead connectors sitting at home if I get the urge..)


But I proudly Give you

 

[kamikazemkiii]

Looks good, what display are you planning on using? how much did the harness come out to be? I'm thinking about sending mine in to them.

 

[K_SHAN]

for the cm1 its 700 or 850 without a core? (they may have changed the core policy)

I will eventually go motec in this car.. so the slr display. Send in your original 7m harness also so they can look it over and get more affiliated with it!!! i sold mine, so they couldn't r&d the early 89 specific harness..

Sneak peak at where this build is heading in the future -16 an fittings? uh...

and look who decided to show up! its my 425cca 7x3 Braille 15lb Battery!

she fits perfectly in the tool flap of the trunk

 

[K_SHAN]

Dat ASS volk TE37s

19x9.5 +22 (245/30/19)
19x10.5 +22 (305/25/19)

I have only rolled/ slight pull on the rear left so far..

100% stock fenders at this point..

 

[kakanator]

em em em those rims are nice 305 is a lot of meat.

 

[atlpd3147]

Your car is setup very nicely.

 

[K_SHAN]

thanks, Just getting it all done up for some shows! and go

 

[K_SHAN]

Installed them On the fenders, some braces, and license plate. I have more for Other things. Might even use them for the valve covers

InJector dynamics 2000cc's 11mm blues (rb26) and 14mm Purples (2jz-gte)..

Just trying to figure out a starter issue. then holy hell she may run.

 

[suprakid93]

i love the stance of this car & the wheels

 

[K_SHAN]

Thanks to Mr. KWnatey.

4inch Ets it will make DAT ASS look much better

front is hanging down but here it is on 2 of the hangers. Need to make a section from the dp to the catback. Right now its

turbo 3inch out
3 inch dp
3 inch cat to a 3.5
3.5 to 4inch cat back


Once I get My Ron.R exhaust manifold (if he builds me one!) I will build a new down pipe/mid pipe and cut off the 3.5 - 4inch expander. then it will be 4inch DP to exit. (after emissions/tuning)

 

[ryansmith]

I want to re do my exhaust that much more now nice wheels man looking at yours I would like to go 17x9s +25 all round using yours as a guide... different laws where I live. wonder how much more snug into the guards that would look. subbed by the way keep it up

 

[K_SHAN]

I didn't quite understand your post haha, but thanks! I'll have more updates soon

 

[ryansmith]

Sorry was using a computer with a bad keyboard, updated my last post.

 

[K_SHAN]

Oh ok haha. yeah in the future I will most likely step down to a 18 or even 17inch wheel.. this setup would be perfect if the offset was +30 in the rear

 

[K_SHAN]

Long story short. Powder coater thought I told him blue for the covers and water neck.. I told him satin black with blue bolts.. lol

hes redoing them after tuning. here is some pictures anyways..

 

[ryansmith]

That looks quite nice in my opinion, something different to everyone else. I would really like to paint mine original colours

 

[K_SHAN]

yeah its a sick color.. just not part of the theme.