Signals Showing and not working

[ryangaudoin]

well i didn't exactly know how to say it cause it's a story
:1zhelp:
well i took my dash gauges and i replaced the green lights with all LED lights and i had to connect and take out cause some of the lights wernt working so i had to wiggle them around, so that took like 2-5 times :3d_frown: i had to keep reconnecting the dash gauge's and now they all work.

Now what's happening is when the hand brake is on the battery light is also on and when i put it down it just dims down but it's still there, and also the signal that shows a ( car with the rear lights on ) is also on, also my signals lights aren't working and i dont know if my reverse lights are working either.
Everything is all hooked up right.

so basically my battery light, car with rear lights, signal lights, and i think my reverse lights aren't working.

and before i did the led lights everything was all good so know i dont know if i reconnect the ecu it will help or not :1zhelp:

 

[ryangaudoin]

Are you telling me that no one knows whats going on here, i know it should be an electrical issue

 

[OneJArpus]

switch back to the regular lights and see if all works again?

 

[ryangaudoin]

when i was connecting and disconnecting to see if all the bulbs work everything worked but then the last time i reconnecting the guages to make sure all the bulbs were working, the signals started to show the signal lights did not work