should i use this turbo

[bridg3r]

hi i selling a dirt bike and some guy wants to trade me this turbo just wondering if i should us on my mk3 and how much would it cost to get it on my car and would there be alot of lag compaired to my ct-26 57 trim thanks for your help link below

http://www.slowboyracing.com/estore/product.php?productid=2209&cat=1264&page=1

 

[Rennat]

i got a 3'' downpipe that will fit that, it even has a super tight 90 bend off the back so you can make a nice downpipe out of it to fit the supra.

just FYI

 

[Red7m]

I have compare the dsm's turbo housing to my supra's and it should beable to bolt up the stock manifold with a little fab work. But there o2 housing would face up so that would need to be fabed as well. But shouldnt be much of a problem, also the dsm's have some awsome bolt-on turbo's that are much cheaper that our. And I dont see why they cant work with a little work. But there turbine housing are made for a little 2L and maynot beable to flow the air of a larger 3L.

 

[MDCmotorsports]

I would think that turbo would be a "monster spooler" due to the small turbine and housing.

The compressor wheel is more than enough to get you in the 400hp range...

You'd need to fab up an adapter plate to mount it to the stock exhaust manifold, but as mentioned shouldn't be too bad.

The down pipe should be easy to make if you have any fab skills at all...

Run it!

 

[tbcmorris]

i would do it.