Setting up Maft pro need help finding Pigtails for the Map/Air temp sensor

[Turbo Habanero]

So i'm installing a maft pro on the 7M and need help with what to do to wire in the Map sensor and Air temp sensor both are GM

My question is do i just need to find to pigtails for them and wire them in ?

And where can i find these pigtails ?

 

[jonahs_supra]

http://www.fullthrottlespeed.com/itemdesc.asp?ic=050MAFTPRO

do you have the speed density harness?
plugs into back of maft pro unit and runs to gm map sensor?

the link of above has the 6ft long speed density harness for $29.99
i cant remember if the IAT sensor wires is built in with this harness

 

[Turbo Habanero]

seems like we have all the harnesses just need the clips for the harness side of the map and IAT sensor

 

[jonahs_supra]

oh those are just simple gm style weather pack connectors

3 pin for gm 3 bar

If the IAT sensor looks like this

Then simply go to your local auto parts store and ask for the sensor harness
Then you WONT need the 2 pin weather pack connector, 2 female pins and 2 gromments

 

[jonahs_supra]

Place your IAT as far away from engine as possible but on cold side of intercooler piping
My location

Cant even see it

Originally i had my IAT mounted in 3000 pipe
But had major issues with heat soaking. 170 degree cruising on the highway on a 95 degree day
Relocation dropped atleast 60-70 degrees

 

[Turbo Habanero]

Will rock auto sell this ?

 

[Turbo Habanero]

And the bung for the iat what size is it ?

Thanks jonah

 

[jonahs_supra]

oh dam i think it was a 3/8 bung NPT thread...Jegs sells it
http://www.jegs.com/i/JEGS+Performance+Products/555/15252/10002/-1

i know i can buy it from napa right now
but im sure rockauto will have the harness and weather pack connector
or ebay has them as well
or any auto parts store will have the weather pack connector and pigtail that you need