SAFC NEO install to a switch

[Donedreamin]

Hey guys, i'm wiring up my SAFC NEO to a switch; just wanted to confirm which power power i use for the switch.
I'm assuming the red/white wire to the switch and the red wire to constant 12V

If anyone could verify this would be much appreciated!

 

[91Supra313]

First question is why in the world would you hook up the NEO to a switch? It's not like your going to be driving and decide to just turn it off. Hook it up like the instructions say and have fun tuning it.....Takes a bit of time.

 

[Another MkIII]

First question is why in the world would you hook up the NEO to a switch? It's not like your going to be driving and decide to just turn it off. Hook it up like the instructions say and have fun tuning it.....Takes a bit of time.

Yeah, wouldn't turning it off cut off your AFM signal completely?
-AM3

 

[bioskyline]

Yeah, wouldn't turning it off cut off your AFM signal completely?
-AM3

yes, with it off, you have no AFM signal, so just wire to ecu like normal. also once wired in, make sure its set to karmen in the sensor select, or you car wont start.

its not something you can turn on and off like lights.

 

[Another MkIII]

yes, with it off, you have no AFM signal, so just wire to ecu like normal. also once wired in, make sure its set to karmen in the sensor select, or you car wont start.

its not something you can turn on and off like lights.

That's what I thought.

To the OP:Not to sound like an ass, but before you go any further, you need to stop, put down the wrenches, and go research some more. You obviously don't understand how the Neo works, and you can really screw your car up if you don't know what you are doing. For starters, as we have pointed out, shutting the Neo off with a switch will cause no AFM signal to go to your ECU. This is a relatively minor problem compared to what you could do with the Neo.
-AM3