Running rich

[IJ.]

I've been begging Mike to get me the Hello Kitty waffle maker...

God no...not more Hell Kitty stuff

 

[hatchet9mm]

so you guys are saying that this attached to the diagnostic port will not read dtc codes?

 

[TurboStreetCar]

Just to be clear, it's not possible to extract DTC information from the diagnostic connector. Might as well plug your toaster in there...

Yes. That is correct.

Again.

Follow this procedure. http://www.cygnusx1.net/Supra/Library/TSRM/MK3/manual.aspx?S=FI&P=23

 

[jetjock]

^ Comma added goodness

OP: No. It also can't make toast...

 

[hatchet9mm]

I just got an o2 sensor and a temp sensor, do I need to rtv or plumbers tape the temp sensor? And also the o2 sensor I got only has one wire and the one on there now has two, do you guys know anything about that? its a Bosch o2 sensor and it says it is for my car but I don't know.

 

[TurboStreetCar]

JetJock: :biglaugh:

Hatchet: Teflon tape should do just fine for the temp sensor. The stock sensor is 4 wire sensor. Two for signal and two for the heater circuit. i would return that sensor and get a sensor that has four wires.

 

[92nsx]

Read,

http://www.cygnusx1.net/Supra/TechTips/engine_error_codes.aspx

AND

http://www.cygnusx1.net/Supra/TechTips/setting_timing.aspx