RS4rush Build thread!

[Justin]

I wasn't aware that it was yours, so i don't see why you responded as if i was making a crack at you.
In any regard It has nothing to do with you leaving it that way. Rather, my point is the harness for the AIT sensor and Map sensor are very very very short for all the maft pros.

I had no intent of responding defensively. There is alot of 'voice' lost through the internet

I did not (and still don't ) understand what you were saying about the wiring being too short. I have had to shorten the wires for both sensors to keep from having to bundle the wire. I can see having length issues if you tried to put the maft unit in the center console or something...


Iss all good mannn!!!

 

[viperkillertt]

I had no intent of responding defensively. There is alot of 'voice' lost through the internet

I did not (and still don't ) understand what you were saying about the wiring being too short. I have had to shorten the wires for both sensors to keep from having to bundle the wire. I can see having length issues if you tried to put the maft unit in the center console or something...


Iss all good mannn!!!

So am i going to finally get to see my climate control unit?

 

[Justin]

So am i going to finally get to see my climate control unit?

YESS!!!!

Do you want it before you come back? or is when you get here fine?

 

[viperkillertt]

YESS!!!!

Do you want it before you come back? or is when you get here fine?

No dude, i dont need you to ship it yesterday so i can use it on the ride home I will see you when i get there and we will mod the second one with a different color scheme

 

[Mr.PFloyd]

Yeah, i put mine in the center console. How did you do the glovebox wiring without having to cut a hole? or did you

 

[Justin]

Yeah, i put mine in the center console. How did you do the glovebox wiring without having to cut a hole? or did you

Yeah, I can see length issues with that


There was already a hole from the VPC and gauges so I'm just using that.

 

[rs4rush]

Yeah, i put mine in the center console. How did you do the glovebox wiring without having to cut a hole? or did you

:biglaugh: Ya, about that. I have like three glove boxes... I can destroy one and be fine.

 

[rs4rush]

Big update! Ok well as some of you know I got fed up with my car and almost sold it... But couldnt. I'm going a whole different way. Blake is buying up just about everything on my car exept a few items. I'm going eathier the Greddy 20G route or a 57trim ct. I'm going to try and make it as close to stock as possible with electronics, so I am going to lex afm and 550 route. Then for tuning it will be the Apexi Neo. Anyway's look out for some major updates!

 

[rs4rush]

Sneak peak at what going to happen this weekend.

 

[SilverSupraT]

Woo woo! That's going to look so sweet! Too bad your car has good paint, that would look amazing with that license plate bit filled in. I can't wait to see it lowered too, you're going to have to be SUPER careful with parking lots and shit tho.

 

[americanjebus]

Dude wtf? no more pro??

It has its learning curve but the climax is worth it. Oh well at least blake will get to go pro if he's the one picking up the stuff.

Have you.... uhhh put in that suspension? I am planning on the same style lip but in black only thing keeping me back is the height w/ the suspension. You saw mine with the same setup and i already scrape all over the place. I shit you not you will have to learn how to drive carefully all over again with that lip.

If your looking for a 57trim I may have one up for very cheap sometime soon, depending on how my finances go this summer. I bent 1 fin ever so slightly on a 20psi pull but have no play yet or loss of power but may need a rebuild sometime in the future

Keep us updated.

 

[rs4rush]

Dude wtf? no more pro??

It has its learning curve but the climax is worth it. Oh well at least blake will get to go pro if he's the one picking up the stuff.

Have you.... uhhh put in that suspension? I am planning on the same style lip but in black only thing keeping me back is the height w/ the suspension. You saw mine with the same setup and i already scrape all over the place. I shit you not you will have to learn how to drive carefully all over again with that lip.

If your looking for a 57trim I may have one up for very cheap sometime soon, depending on how my finances go this summer. I bent 1 fin ever so slightly on a 20psi pull but have no play yet or loss of power but may need a rebuild sometime in the future

Keep us updated.

I wish I could keep the maft but I dont have the time to learn how currently. I'm in the proccess of moving back to Seattle and I need the car running. So I gotta go back to what I know, which is lex afm/neo. Oh I know, I'm probly going to destroy the lip. I'm actually getting a Greddy 20G from my good friend Kevin_M. It should be running here pretty soon.

 

[rs4rush]

New pictures of my Turd gauges.

 

[rs4rush]

Pictures speak for itself! Bic exhaust.

 

[Mk3runner]

vid of exhaust?

 

[Justin]

vid of exhaust?

car has to be running for that to occur



Looks great man.

 

[rs4rush]

vid of exhaust?

Ya about that... Ill do pictures, video, some more pictures and more videos when I get the car running which should be in a week or two.

car has to be running for that to occur



Looks great man.

Thanks, bought time I did somthing right? Come help me with ma gauges! We need to sauder and heat srink a few things to.

 

[SilverSupraT]

....in a week or two.

LOL what happened to getting it going this weekend? :sarcasm:

Looking great man, I can't wait to hear that exhaust!

 

[rs4rush]

LOL what happened to getting it going this weekend? :sarcasm:

Looking great man, I can't wait to hear that exhaust!

I'm shooting for it but you never know! I still have to get my downpipe from BIC, so will see.

 

[rs4rush]

I got a new present

Apexi Neo