RPS max series problems

[pearlblue]

just put a RPS max series clutch in having major problems getting it into gear the dealership ajusted the pedal all the way out they cant figure it out and I cant figure it sooo mad about the whole thing any information would be most helpfull!!! thanks:aigo: :aigo: :1zhelp: :1zhelp:

 

[7M-GTE]

just put a RPS max series clutch in having major problems getting it into gear the dealership ajusted the pedal all the way out they cant figure it out and I cant figure it sooo mad about the whole thing any information would be most helpfull!!! thanks:aigo: :aigo: :1zhelp: :1zhelp:

I've had my rps max stgIII in for a while now with no problems... other than w\ the 3200lb pressure plate being hard to push in... but thats ok... was it installed properly?

 

[pearlblue]

dont know?? they claimed everything look good but it cant be right!! dropping it back off to them on monday tell them to do it over again

 

[7M-GTE]

dont know?? they claimed everything look good but it cant be right!! dropping it back off to them on monday tell them to do it over again

yeah I'd look into that... b\c I'm lovin this clutch... no problems yet...

 

[IJ.]

Disc in back to front would do that

 

[pearlblue]

please explain what you mean by that thank you !!! like disk in backwards or??

 

[kwnate]

Where is the parts review??? I wish people would read the stickies...

So annoying:3d_frown:

 

[shaeff]

thread moved.

-shaeff

 

[IJ.]

BP: The disc can only work right if it's installed the right way around so if the installer flipped it around it will do what you're describing.

I'd get under the car and get a friend to push the clutch and watch the Slave cylinder to make sure it's getting full travel first.