I am the first one to be matched
The mods are a lil wrong but here it is
Here are a list of parts I have done since this year started. I will not have pics just yet of these parts (some are already posted) Since people are PMing me, I thought I would just post up to show everyone Here they are as follows.
Toyota
-Steering Column covers front/back and underneath as well.
-Wiper arms
-Window visor on the bottom
-3 vents
-Seal for back of firewall
-Seal for hatch
-New tail lights all around
-New hood latch
-OEM flywheel
-Timing cover/had it milled to make smoother,then had it powder coated black
-Headlight surround covers? The black plastic parts that surround the headlights
-Will eventually have the entire trim replaced (if all is available) throughout Supra when I paint the car.
Extreme Turbo Systems (Thanks Joe)
-Custom intercooler 31x14x4
-Custom piping from Ron R (another when completed will post pics)
Titan (Thanks Sean)
-Titan cam gears
-Turbo blanket
-RPS clutch
-HPF 6 puck disk (from HPF Obviously)
-4 V-band for my new turbo
New block
-Je's (coated)
-TI Cunningham rods
-Major ported head
-OS valves
-3 Angle valve job
-Custom Billet steel cams from TED
-Custom oil pump spring
-HKS 2mm gasket
-GReddy timing belt
-ARP's etc...
-ARP bolts throughout engine...some are on backorder
Engine bay
-Had the entire bay stripped to bare metal then etched. Had all 147 holes filled (welded) then ground down and then primed then painted. OEM colour.
-All SS allen head bolts throughout! Including the bolts on the outside of car are SS. (from Taillights etc..as I have a local shop that specializes in ONLY SS metric!)
Turbo/manifold
-T88 34D Good for 780-820 RWHP (at least that is what most 2J's put out)
-Custom one off 321SS header from Ron Ramirez. See pics I decided to go this route for a few reasons. I can mount the turbo where I like it and not have to worry about it cracking.
-Tial 46mm wasgate with A&N fittings
-Custom SS 4" down pipe with custom exhaust along with a custom Burns muffler.
Fuel
- Eliminator pump from Aeromotive (sendinf biggest they make and biggest for stret use)
-RC 1000cc's
-OEM fuel rail still with custom -8 feed and -6 return (same as last year with -8feed from tank as well)
-Sump as I also had last year
CNC parts
-Seven M pulley set > both water pump and alt
-Magnetic pickup for trigger wheel
-Oil cooler brackets
-Nitrous brackets for lines (Pics coming later on)
-working on other parts..
Working on Valve covers as we speak and have one already programmed! :naughty:
Mag coverages this year
Sport Compact Car/cover shot as well!
Japanese Pefformance
Many misc articles but I am not in front of my puter so can say what year and such.. You get the point.
Old set-up which was 620 RWHP I ran a best of 11.00@130.29 MPH 665 was not tested at the track.
Duane
