Don't even know at the moment... lol. I've made so many changes lately its sure to have changed. However, when the motor comes out this time for a freshening of the short block(pulling motor tomorrow), and the new and improved cylinder head.....
I was running a stock head with a mild P&P and stock cams... the new head is heavily ported, full ferrea valvetrain with 1mm OS valves, locks, springs, retainers, and BC cams...
The new goal is 699/maxed out injectors/30 psi of boost... whichever comes first(unless its 699, then I'll go higher...lol)