Hey is anyone having any issues with the BC 264 degree cams making noises similar to "rod knock" I am and I really dont think it is rod knock just wondering? lmk mattsplat
Rod like noises From cams
- Thread starter mattsplat72
- Start date
Valve tick? Have you checked the clearances on each lifter bucket to see if there within spec?
-Chris
-Chris
^Thats definitely not a sig worthy quote.
Sounds like you just need to check valve clearance and do some shimming.
Sounds like you just need to check valve clearance and do some shimming.
Will be checking that today Just had the head done when I replace the HG and then swapped in the BC cams wernt they suppossed to be Drop In?
AEM EMS are plug and play... does that mean you plug it in, crank the boost and are good to go? No.
No, but they are set up to work just fine at factory levels . Which is what I was told was the case with the 264 cams by Crower and HPF. The 272's on the other hand required replacement of the shims .Hence my purchase of 264's. Damn ever heard of a learning curve!
You're on cams... I would expect you were done with the aftermarket curve.
Also, 272s required replacement of the springs and their directly related parts... different shims could be necessary for swapping in ANY cam.
Also, 272s required replacement of the springs and their directly related parts... different shims could be necessary for swapping in ANY cam.
Yep, even going from a stock set of cams to another set of stock cams, you have to check those shim clearances.
"no offence" LMAO, wtf did you say it for then?
You want to put your cat or whatever in your avatar I don't care. But that was a barely entertaining post to begin with, and definitely not worth showing off with nearly every post you make.
You want to put your cat or whatever in your avatar I don't care. But that was a barely entertaining post to begin with, and definitely not worth showing off with nearly every post you make.
i said it, because you went out of your way to make a statement about my quote. explain to me what sig worthy quote consists of. the "no offence" was said to keep a flame war from erupting.mkIIIman089 said:
well, sorry if i'm not entertaining you. i'll try harder. why are you concerning yourself with me anyway? i appreciate the attention, but i don't need any.
and i'm not sure how to turn off the signature for more than one post. i'll look into it for you. yup, i'm a noob.
Dunckel said:
HEY STFU and take it some where else I am trying to work out MY FUCKING PROBLEM HERE :nono: .....ASSHOLES
Yeah, this thread could use a little cleaning 
Matt, I already answered up above bro. Even going from stock cams to another set of stock cams, you have to check the clearances.
That said, in another thread I saw the card BC is including, and it mentions running .006/.008 lash on the cam (which, IIRC, is a little tighter than stock)
Matt, I already answered up above bro. Even going from stock cams to another set of stock cams, you have to check the clearances.
That said, in another thread I saw the card BC is including, and it mentions running .006/.008 lash on the cam (which, IIRC, is a little tighter than stock)