Rod knock :/
- Thread starter st2b
- Start date
Thanks guys, I will try everything tomorrow, and hopefully it is something small I can track down and at least make by the dyno!
I know I have a exhaust manifold leak and it gets pretty loud but when you replaced the intake manifold gaskets did you put new ones on?
Yeah and I used gasket sealer, not to mention I do have an exhaust leak, but it sound like it's coming from the top on the engine rather than the Y pipe (Where the exhaust leak is).
AJ'S 88NA said:
We bought the car with an exhaust leak, at the Exhaust Y-Pipe. The intake PASSED the smoke test at StreetSports! So no leaks, and I'm suprised!
I'm not for sure what it could be. I'm going to pull the injectors tomorrow after the dyno.
I JUST GOT BACK FROM THE SUPRAMEET!!
A 1jz Supra was running 15's......
I JUST GOT BACK FROM THE SUPRAMEET!!
A 1jz Supra was running 15's......
I'm wondering if this is really RK. St2b has posted a series of issues lately, just pulled the intake mani and voila: Rod Knock!
It just seems coincidental, doesn't it?
It just seems coincidental, doesn't it?
I hope not. Actually wait, if I do, I will have a place for that 2jz to go 
Sorry guys I can't hold out anymore, I bought a 2jzge from a buddy who had RTC swap in a GTE and PHR turbo kit on his 95.
I have to move my car from my house to my grandpas where the motor is on the stand =]
Now I need to invest in tools...
Sorry guys I can't hold out anymore, I bought a 2jzge from a buddy who had RTC swap in a GTE and PHR turbo kit on his 95.
I have to move my car from my house to my grandpas where the motor is on the stand =]
Now I need to invest in tools...
You put everybody thru all this shit when you had another motor sitting to drop in??st2b said:I hope not. Actually wait, if I do, I will have a place for that 2jz to go
Sorry guys I can't hold out anymore, I bought a 2jzge from a buddy who had RTC swap in a GTE and PHR turbo kit on his 95.
Youi put everybody thru all this shit trying to help you out when you had another motor setting to drop in??:3d_frown:
I have to move my car from my house to my grandpas where the motor is on the stand =]
Now I need to invest in tools...
lol, what a duesche bag ...
Insults aside, Craftsman makes good tools for the homeowner. Home Depot carries Husky, which is made by the same people, and has a lifetime warranty as well, for around 2/3 the price. Get all your sockets, wrenches, ratchets and such at H.D. Get your specialty tools, like Torque wrenches, at Sears(these are better). If you decide to get air tools, get IR(Ingersol Rand), and keep them oiled. Oil them before you use them, and before you put them away.
...Insults aside, Craftsman makes good tools for the homeowner. Home Depot carries Husky, which is made by the same people, and has a lifetime warranty as well, for around 2/3 the price. Get all your sockets, wrenches, ratchets and such at H.D. Get your specialty tools, like Torque wrenches, at Sears(these are better). If you decide to get air tools, get IR(Ingersol Rand), and keep them oiled. Oil them before you use them, and before you put them away.
I was plan on building it na-t before dropping it in the car. I kindof don't have the money to build it, fact is it's not going in the supra as a turbo engine for a while.
I'm going to keep it 7m until I learn how to drive, then upgrade to the built 2j.
So it's not all pointless to help me out, I thank all of you guys because I'm going to go back out there tomorrow and work on tracking down the problem, then fix it...
But if push comes to shove I might have to go 2jz-ge
I'm going to keep it 7m until I learn how to drive, then upgrade to the built 2j.
So it's not all pointless to help me out, I thank all of you guys because I'm going to go back out there tomorrow and work on tracking down the problem, then fix it...
But if push comes to shove I might have to go 2jz-ge
